gegsy

Forum Replies Created

Viewing 15 posts - 331 through 345 (of 6,724 total)
1 2 3 … 22 23 24 … 447 448 449
  • Author
    Posts
  • July 3, 2008 at 9:27 pm in reply to: “Ooooh Matron” ? #165797
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    Already done K, hope that was ok 😉

    Greg

    July 3, 2008 at 9:21 pm in reply to: Whirlpool American Fridge Freezer broken down – help! #142027
    gegsy
    Participant

    Re: Whirlpool American Fridge Freezer broken down – help!

    Drip tray off and two screws hiden under it, then it lifts up and off after disconnecting two plug on cables off pcb.

    Power off first :plug:

    Greg

    July 3, 2008 at 9:19 pm in reply to: “Ooooh Matron” ? #165795
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    Nice reply and have done yer Miele spelling so prat can’t pick you up on that 😀
    Awaiting his reply :popcorn:

    Greg

    July 3, 2008 at 7:55 pm in reply to: rs21kpsv1xeu #256818
    gegsy
    Participant

    Re: rs21kpsv1xeu

    A lot less than they used to be. Bryan R600 will have an exact price Im sure 😉

    Greg

    July 3, 2008 at 7:50 pm in reply to: rs21kpsv1xeu #256816
    gegsy
    Participant

    Re: rs21kpsv1xeu

    Free if its a watchdog candidate 😆

    Greg

    July 3, 2008 at 7:31 pm in reply to: Bosch F/F En-r KGV-3104-GB/04 #256801
    gegsy
    Participant

    Re: Bosch F/F En-r KGV-3104-GB/04

    Yea Rob I meant 😆
    Its me age ya know 😛

    Greg

    July 3, 2008 at 7:29 pm in reply to: rs21kpsv1xeu #256814
    gegsy
    Participant

    Re: rs21kpsv1xeu

    Cool zone cover is DA97-05290E

    Greg

    July 3, 2008 at 7:25 pm in reply to: Siemens Fridge Freezer KG32U123GB – Probs with temperature #256730
    gegsy
    Participant

    Re: Siemens Fridge Freezer KG32U123GB – Probs with temperatu

    Can you re-check that model number again 🙂

    Greg

    July 3, 2008 at 7:18 pm in reply to: BoschSGS45EO2GB/45 dishwasher #256794
    gegsy
    Participant

    Re: BoschSGS45EO2GB/45 dishwasher

    Most likely the aquasensor housing has got crudded up. It is quite inaccesible and you may need to change the heater unit to cure 😥

    Greg

    July 3, 2008 at 7:11 pm in reply to: Bosch F/F En-r KGV-3104-GB/04 #256799
    gegsy
    Participant

    Re: Bosch F/F En-r KGV-3104-GB/04

    There is a mod to bypass the foamed in NTC.
    You have mail smartin 😉

    Greg

    July 2, 2008 at 11:46 pm in reply to: haier bearings #256723
    gegsy
    Participant

    Re: haier bearings

    helo_75 wrote:i believe watchdog are on the hunt………………..

    Its about friggin time 👿 and they may as well do that sovereign crap aswell 😉

    Greg

    July 2, 2008 at 11:45 pm in reply to: “Ooooh Matron” ? #165789
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    Probably me being paranoid 😀
    Good reply though 😉

    Greg

    July 2, 2008 at 11:38 pm in reply to: “Ooooh Matron” ? #165787
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    http://www.ukwhitegoods.co.uk/modules.p … 634#189634
    82-38-162-25.cable.ubr03.roth.blueyonder.co.uk

    I wonder 😕

    Greg

    July 2, 2008 at 11:06 pm in reply to: Got This Phonecall… #256427
    gegsy
    Participant

    Re: Got This Phonecall…

    Nice on K :tup:

    Greg

    July 2, 2008 at 10:53 pm in reply to: Bosch WFD2072GB/05 #256507
    gegsy
    Participant

    Re: Bosch WFD2072GB/05

    Hi
    Rear tub will come complete with bearings and water seal and you will most likely need the front tub ( 217424) as you have to cut the locking nibs to seperate the old tub halves therefore rendering it u/s.
    I would also replace the suspension legs (448032 the pair) as the new ones are more substantial.
    Make sure you dont forget to fit them onto locating pegs of tub before offering the two halves of tank together 👿 been there and have got the t-shirt :rolls:

    Greg

  • Author
    Posts
Viewing 15 posts - 331 through 345 (of 6,724 total)
1 2 3 … 22 23 24 … 447 448 449