gegsy

Forum Replies Created

Viewing 15 posts - 316 through 330 (of 6,724 total)
  • Author
    Posts
  • in reply to: Bosch KGN34X00G Fridge #257275
    gegsy
    Participant

    Re: Bosch KGN34X00G Fridge

    Im sure your appliance is possibly within its 2 year guarantee 8)
    I would contact BSH for a service call as it will need an engineer to sort for you 😉

    Greg

    in reply to: Kenwood CK440 cooling fan making lots of noise #257257
    gegsy
    Participant

    Re: Kenwood CK440 cooling fan making lots of noise

    Power off first :plug: if you are to attempt 😉

    Greg

    in reply to: Bosch SGS43A22GB getting stuck mid cycle #257089
    gegsy
    Participant

    Re: Bosch SGS43A22GB getting stuck mid cycle

    trackie wrote:……….I managed to clear it using a bike pump, some garden watering system hose, insulation tape and the nozel from a tube of flexible sealant.

    Sounds like a night in for me that 😯 😆
    Glad you sorted 😉

    Greg

    in reply to: Bosch SGS43A22GB getting stuck mid cycle #257087
    gegsy
    Participant

    Re: Bosch SGS43A22GB getting stuck mid cycle

    Most likely the usual suspects.
    Crud in the rigid hose from the front of sump to metering unit on the lhs, crud in that unit and crud in the top left of the water matrix; the air break.
    You will need to remove the l/h panel, the door outer panel and the panel below the door to gain access to all parts in question.

    Power off before attempting any of this :plug:

    Greg

    in reply to: re whirlpool oven hinges #256242
    gegsy
    Participant

    Re: re whirlpool oven hinges

    ashfordkent wrote:Cheers Chris youre a star !

    No he’s a :p45: 😆

    Greg

    in reply to: Its so sloooow #254747
    gegsy
    Participant

    Re: Its so sloooow

    Thank god its only the beer to hand 😯 😆

    Greg

    in reply to: “Ooooh Matron” ? #165809
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    Im warming to helo 😯 maybe Im mellowing in my old age 😆

    Greg

    in reply to: BoschSGS45EO2GB/45 dishwasher #256796
    gegsy
    Participant

    Re: BoschSGS45EO2GB/45 dishwasher

    Every cycle uses the turbidity sensor IIRC.
    You may also find that each time you start a programme, the times may be different from the last; that is normal 😉

    Greg

    in reply to: Card Table #256984
    gegsy
    Participant

    Re: Card Table

    kwatt wrote:Who has time to go to the pub? 😆

    Never mind the time, who has the money 😆

    Greg

    in reply to: bosch sgs6302GB/07Lower door seal #256974
    gegsy
    Participant

    Re: bosch sgs6302GB/07Lower door seal

    I usually take tension off and then just remove top screw of each of the hinges. Remove old seal and do reverse.
    Its a fiddle but do-able.
    The plastic does go between the door inner and the hinge,get one screw in slightly then do the other side.

    Watch them edges as stated before ❗

    Greg

    in reply to: Brand New Siemens KG39NA90GB Loud Noise #257015
    gegsy
    Participant

    Re: Brand New Siemens KG39NA90GB Loud Noise

    Probably the evaporator fan has been dislodged in transit, although that would usually be sounding from the off 😕

    Its your call really, maybe a service call from Bosch would sort you the quickest imho 😀

    Greg

    gegsy
    Participant

    Re: Siemens Fridge Freezer KG32U123GB – Probs with temperatu

    Not had any problems with them TBH, best leave the engineer sort.
    When it borks again, make a note of what you can hear ie- fan,compressor sounds and what is on the display.This will aid him when he returns.
    Also, is it possible one of the doors may have been left ajar at some stage?

    Greg

    in reply to: Fan element Siemens cooker HB28055 GB01 #256292
    gegsy
    Participant

    boselecta wrote:customer told me fan element blown, went there this pm grill element blown!…….

    P/no 470081

    Greg

    in reply to: Bosch F/F En-r KGV-3104-GB/04 #256803
    gegsy
    Participant

    Re: Bosch F/F En-r KGV-3104-GB/04

    More mail me thinks 😉

    Greg

    in reply to: “Ooooh Matron” ? #165799
    gegsy
    Participant

    Re: “Ooooh Matron” ?

    Do you think K, that he has been recruited by Miele to spread the word as it were.
    If you cast your mind back to last year when us mods were getting spammed to help Miele :rolls:
    Maybe, unluckily they stumbled across know all from tha north tha knows 😆 ❓

    Greg

Viewing 15 posts - 316 through 330 (of 6,724 total)