[gegsy]

helo_75 wrote:agreed, hed be like a loaded weapon… he’d use all the knowledge and help we provide each other

Wouldn’t glean much from Off Topic 😉

Greg

[gegsy]

Re: OI HORNSBY!!! step into my office

Maybe Mr Watt could give him access just to this forum perhaps?
He is almost (choke) trade : 😈

I have my popcorn at the ready :popcorn:

Greg

[gegsy]

Re: Happy Birthday Dave Conway 🙂

Have a good one Dave and don’t worry about the hangover……..stay pissed = no hangover…..SORTED 😆

Greg

[gegsy]

Re: BOSH DRYER wta4007gb/04

Hi

Belt removal
Take of the opening cover on the base plate.
Remove the belt from the belt tension adjuster.
Take off work top panel, facia panel, front panel and bearing. (see dismantling bearing plate.)

Belt Tension adjuster
Put the appliance on its back.
Open the opening ion the base plate.
Take off the belt.
Remove the two screws of the belt tension adjuster at the base plate and take off belt tension adjusters over the opening in the base plate

Belt mounting
To put new one on you need to draw up the belt over the drum
Hang up and bolt bearing plate and then stretch the belt with the belt tension adjuster (if you have one 😉 )
Close the opening on the base and re assmble fascia etc.

HTH
Greg

[gegsy]

Re: Bosch SGI5305GB/13 Taking a long time to wash

I would be looking for a dry joint on the relay feeding the heater 😉

Greg

[gegsy]

Re: Siemens KA58NP90 Side by side fridge/freezer Ice despens

Hi
Been to a Neff equivalent today funny enough 😀
Glad you have an engineer booked and hopefully soon on the road to ice dispensing. 😉
It does sound like the solenoid drive for the ice shute may have died and/or module that feeds it.
Keep us posted anyway as it makes a good read for us 8)

Greg

[gegsy]

Re: Bosch WTL5400 Dryer

Hi
If filter and condenser are clear and there is good air flow ie fan running correctly; you would be looking at an overheating fault for whatever reason, faulty NTC R2 (above heater box) or faulty NTC 4 ( in the airstream above condenser unit)
Worth checking cables to these NTC’s back to PCB aswell.

Greg

[gegsy]

Re: Siemens KA58NP90 Side by side fridge/freezer Ice despens

Hi
When you say the icemaker works fine, do you mean it makes ice or it makes the usual motor auga sound but flap stays shut when you call for ice ?
The Test button is mainly for engineers to force the ice maker unit to simulate a cycle thus being able to tell its faulty or not, easily.

HTH

Greg

[gegsy]

Re: Samsung rs 21 condensation

Probably in need of the modified backplate and sensor.
Maybe also a split water reservoir (if fitted) due to above problem.

Greg

[gegsy]

Re: Miele W715

Most Miele dont come to life until the door is closed. Maybe an interlock fault 😕

Greg

[gegsy]

Re: Microsoft Security update.

A Vista update Jim? Mine went ok, was a biggun though 😆

Greg

[gegsy]

Re: Neff HTET715

Part is current 476984, the price you quoted washman, is inc of VAT as tradeplace shows it as £110.13+VAT which equates as your price. P&P is usually extra 😀
Greg

[gegsy]

Re: Whirlpool Dryer from USA

Ok then maybe this might do the trick 😀

Greg

[gegsy]

Re: Whirlpool Dryer from USA

Don’t know if <a href="http://cgi.ebay.co.uk/300W-AC-Power-Voltage-Converter-Transformer-120V-240V_W0QQitemZ220253064194QQcmdZViewItem?hash=item220253064194&_trksid=p3286.m14.l1318
” target=”_blank” rel=”nofollow”>this is what you are looking for and is 300w enough 😕

Greg

[gegsy]

Re: Spam

Another one for you K :rolls: sinepevis

Greg

[Author]

Posts