[gegsy]

Re: Bosch sgs 43a12gb

You should of had coding sheet in module box 😯
Check your email 😉
Greg

[gegsy]

Re: large whirlpool t/loader

Thats odd, I dare say a 6.3A may not have saved the timer. The 10A was advised by a tech bod 😕

Greg

[gegsy]

Re: large whirlpool t/loader

Hi
Replace it for a 10A won’t get any call backs. Same with Maytag aswell the inline fuse is more of an importance in US where they have no plugtop fuse.

Greg

[gegsy]

Re: Bosch sgs 43a12gb

Hi
The fascia from what I can make out runs from left to right
Intensive – Auto 55/65 – ECO50 – Gentle – Quick

If that is correct you should have selected coding 25 😀

Greg

[gegsy]

Re: Bosch WFD2060GB/01

Bryan wrote:Assuming it`s 481540

Yes it was Bryan, that was the original but there must have been a component/software change for BSH to have supeceded it 😕

Greg

[gegsy]

Re: Another joke.

Subject: Yellow 24

A man goes to the doctors feeling a little ill. The doctor checks him
over and says, “Sorry, I have some bad news, you have Yellow 24, a really
nasty virus. It’s called Yellow 24 because it turns your blood yellow and
you usually only have 24 hours to live. There’s no known cure so just go
home and enjoy your final precious moments on earth.”

So he trudges home to his wife and breaks the news. Distraught, she asks
him to go to the bingo with her that evening as he’s never been there
with her before.

They arrive at the bingo and with his first card he gets four corners and
wins £35. Then, with the same card, he gets a line and wins £320. Then he
gets the full house and wins £1000. The national grid comes up and he
wins that too getting £380,000.

The bingo caller gets him up on stage and says, “Son, I’ve been here 20
years and I’ve never seen anyone win four corners, a line, the full house
and the national grid on the same card. You must be the luckiest man on
Earth!

“Lucky?” he screamed. “Lucky? I’ll have you know I’ve got Yellow 24.”

“F@@k me,” says the bingo caller. “You’ve won the raffle as well.”

[gegsy]

Re: Bosch WFD2060GB/01

Hi Jim
You have more or less limited it down to module to be honest.
It has had a part change to 493685 £157.59+ VAT list.

Greg

[gegsy]

Re: Bosch sgs 43a12gb

Hi
Can you tell me the full enr and from left to right the selections you have on the fascia.

Cheers

Greg

[gegsy]

Re: Tecnik TKC071 element

Dave_Conway wrote: Masterfart

😆

Greg

[gegsy]

Re: Bosch Logixx SGS0902GB/04 – Soapy residue remaining

Hi
It seems strange that you are experiencing a different fault after the “relay” board, which Im assuming is the power module board in the base 😕 ; had been changed.

There is a slight chance that when it was replaced, the coding may not have been successful or correct.
I would therefore allow the engineer to return to assess to be fair.

Now to the rinse aid confusion 🙂 depending on what type of dispenser you have.
If you have a top dispenser, the rinse aid level will adjusted by yourself on the user menu. 0-7 where 0 is no rinse aid dispense. The other method is in the rinse aid compartment,by turning the arrow and again 0 will be no rinse aid dispense.
On that note also, you may come unstuck if you use 3 or 4in1 tablets in conjunction with rinse aid as you will technically be double dosing.

Hope that helps

Greg

[gegsy]

Re: neff not cleaning

Hi
If you have checked, especially the ribbed pipe at the front from metering unit to sump, and there is water just below the bottom spray arm mount, then I would be looking at the recirculation motor; either weak,start capacitor or possibly the impeller may have become detached.
If that is the case you will need p/no 165813 available from spares@ukwhitegoods.co.uk 😀

Unplug appliance before investigating further :plug:

Regards
Greg

[gegsy]

Re: Bosch WFO2867GB Won’t stop filling!

Hi

ChrisG1 wrote: How does it work out the correct ammount of water for the load?

Penguin45 wrote:The machine uses the displacement of air in a pressure chamber to force it into a diaphragm switch

which, as the water gets higher, more air is pushed up the tube and will activate different level switches to correspond accordingly to what cycle you are on. ie low water for wash and higher for the rinses.

HTH

Greg

[gegsy]

Re: Bosch WFO2867GB Won’t stop filling!

Hi
The same module/pcb (447813) is used in all six models in that range.

Greg

[gegsy]

Re: Whirlpool (built in)

Yes, I agree. Im sure it doesn’t owe you anything 😉 in fairness to it.

Greg

[gegsy]

Re: Whirlpool (built in)

Hi
If the water level after filling is just below the lower spray arm mount, then I would be lookin at a recirculation problem.
It could be the wash motor,timer or wiring loom that is causing the problem.

Unplug appliance before investigating :plug:

Greg

[Author]

Posts