Forum Replies Created
-
Posts
-
Re: Anguis in herba
Hello hello hello……..
Ken_W as in Ken Watt, posting from a wanadoo address 😕Greg
Re: Bosch Maxx WFO2860GB/01 – Heating element?
If you look carefully for screws at bottom and one behind soap drawer you just might crack it 😉 If you feel out of your depth please feel free to use the engineer link below.
Greg
Re: Bosch Built in DW
maltheviking wrote:Solder would be good if I could actually find the hole!!
Get a big torch put it tank close door and look underneath tank 😀 Works for me. You will need time for your eyes to get used to the dark aswell 😆
Greg
Re: Bosch Built in DW
Hi Malt
Not a spare Im afraid.
Most common reasons for porous tanks are knifes falling down whilst loading and clumsy salt replemishment and leaving crystals to stay in contact with tank.
There is a special solder available to enable repair, can’t think for the life of me what it is, Boro will know 😉Greg
Re: Bosch Classixx WAE24162 or Siemens WXLM148A?
Hi Doug
Its the same machine more or less internally and does have same motor and brushes FYI 😉Greg
Re: Bosch Maxx WFO2860GB/01 – Heating element?
Hi
Can’t give you a blow by blow way of changing element.What I would say is that front panel will come off and heater is at the 6 o clock position.Please un plug appliance before attempting any repair :plug:
Greg
Re: Siemens SE24200GB not filling
Hi
That front panel will need detaching from plastic loom protector.
Once gained access and with sump completely drained of water; remove the ribbed hose that goes from metering unit to sump and clean thoroughly.Appliance unplugged of course :plug:Greg
Re: Smeg SUK62MFX5 – Oven fault (will not heat)
Does the cooling fan come on, blowing above the door of the oven, say after 10 mins?
Greg
Re: anyone own a candy fridge freezer model CP2812/9
http://www.ukwhitegoods.co.uk/modules.p … pic&t=4360
Look at no 8
Sorry Im not familiar with that appliance
Greg.
