[gegsy]

Re: Bosch SGS5312GB Not Heating

linrew wrote:

i would not recomend soldering the dry joint up to fix the board. i would purchase a new one.

linrew

Why not?
Its just the depletion of solder because of small pad that has made it overheat and cause fault. Cleaning up the joint and re soldering is a more than adequate repair. Done loads in 10 years,why waste a perfectly good board and throw money away.
Greg

[gegsy]

Re: Bosch SGS5312GB Not Heating

Ever seen generation game 😆
These will slot in left and right of door just above door well.Will be obvious when you get one in, no hassle really.

Greg

[gegsy]

Re: UK Whitegoods Meeting – Feb 06

Venue – Nice rooms, poor service and disorganised
Rooms – Lovely
Beer was fine
Food – Next door pub was lovely, a;though orders did go astray
Kevin – Well, he erm had a present that mysteriously made its way upstairs with new owners 😯
Fire Alarm – Dont ask 😉
Goatboys Hat – 😯 Ask Kev

All in all it was my first meeting and loved it.

Thanks again,
Sorry didnt meet you Martin

Greg

[gegsy]

Re: UKW slow server problem located

Thanks Martin its all been up knob creek since you been away we have been up to mishief but now you are back we will behave.
Welcome back btw hope you had a nice holday 😉

Greg

[gegsy]

Re: Getting the brushes out of a Bosch WFL2260

Defiantely motor out its a bugger gettin the springs down guide out of motor nevermind with motor still on appliance 😉

Greg

[gegsy]

Re: Bosch SGS5312GB Not Heating

Also check heater and under wash conditions, the activation of the heater microswitch.

Greg

[gegsy]

Re: Bosh SRS5602GB/04 D/Wash – empty problem

Hi
Possibility that the impeller has become detached from motor shaft.
No easy way to do this just appliance on its back and slacken base enough for you to get at drain pump. It is on this model a twist and lock thankfully, remove and inspect. Failing that you will have to check internal empty hose starting from sump to L/H tank.
God luck 😉
Greg

[gegsy]

Re: Bosch time selector stuck

If it turns out to be the knobs, they can be prised apart but easier to change whole fascia – 290032. Sounds more like a seized timer to me.

Greg

[gegsy]

Re: Smeg DWI612 Not starting program

Sounds like a faulty or jammed re-circulation pump.
Greg

[gegsy]

Re: Washing machine doesn’t start up.

Ok
To give anymore help we would need a model number and a production number, these can be found on the door inner.

Greg

[gegsy]

Re: Removing PCB from Bosch KGU 3220GB

It will pop off if you gently tease it away from the top of fridge by using a flat utensil.

Greg

[gegsy]

Re: Washing machine doesn’t start up.

Have you tried closing door a bit harder, could be door interlock problem

Greg

[gegsy]

Re: Samsung Side by side fridge freezer problem

Hya Dave :wave:

Greg

[gegsy]

Re: LPG cookers

You getting the drift Rhiananders.
Without also sounding rude, I cant believe you would risk yourself,your family and guests (b&b) knowing you have a serious problem.

Hope you get resolved soon

Greg

[gegsy]

Re: Bosch KGU3200GB f/f – fridge not working.

Hi
Like I said without seeing the appliance impssible to tell.
You could always use the engineer link below and get the PCB conmfirmed as faulty. These f/f have a good lifespan and quality, seemms a shame to write it off.

Greg

[Author]

Posts