Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: in-line heater test?
Looks like supressor/ mains filter to me
Greg
gegsy
ParticipantRe: bosch dishwasher sgs43a22gb/01 fd 8207 820344
:rotl: hows u anyway?
Greg
gegsy
ParticipantRe: bosch dishwasher sgs43a22gb/01 fd 8207 820344
Hris is correct, nice name change 🙂
reg
gegsy
ParticipantRe: Awkward Customers
Fairdeal wrote:why did you put big stones in my washing machine” well what should you say in responce?
So you can use them down the river with your washing 😈
Greg
gegsy
ParticipantRe: in-line heater test?
Really good stuff here guys, but what you are getting into now is more than really “basic” help for guiding a member of the public to repair their own appliance. We have to be very careful as not everyone has the same ability that you guys appear to have 😉
If you find the problem excellent and please share it with us all, but going into any more depth is not appropriate, sorry.Greg
gegsy
ParticipantRe: in-line heater test?
Im not familiar with AEG but I would imagine they have a safety thermostat under base, possibly with a red button that you can press to reset :con:
Greg
gegsy
ParticipantRe: Bosh SRS5602GB/04 D/Wash – empty problem
Its a great job.
Ideal way is on its back on workmate so you know squinting and back aching.
Just drop the base enough to gain access.Greg
gegsy
ParticipantRe: Bosch Dishwasher – Leaking Water on Delivery
Ifs wrote:
Maybe Bosch could empty all of the water out after testing?
All manufacturers water test, so would be same for any make.
Hope you get sorted.
Greg
gegsy
ParticipantRe: Bosch Dishwasher – Leaking Water on Delivery
Keep it upright or yes it will leak out of door. They should give stores in house traing as how to load/transport appliances especially fridges and freezers. Ive seen them load fridges etc on their back and sideways in cars, and sayleave it for a few hours be ok, what b*llox.
Back to topic, try appliance Im sure it will be fine. If you are unhappy, I would return it to store (upright) and express your concerns.
Greg
gegsy
ParticipantRe: in-line heater test?
I would imagine you have lost a neutral feed. Check heater terminals on block and should read between 25-30 ohms.
Greg
gegsy
ParticipantRe: Complaints Dept
The call centre woman I spoke to in Transco was so rude, everything was too much trouble, no wonder people don’t report gas leaks etc
Greggegsy
ParticipantRe: Bosch Fridge Freezer KGU32161 GB/01
Hi
Sorry for delay in replyin 😳
This is a complex machine, but to me would indicate a problem with possibly a build up of ice in freezer (numerous reasons why) obstructing airway to fridge. I would seriously consider the engineer link below.Greg
March 22, 2006 at 12:24 am in reply to: Bosch SGS43C12 – lower spray arm not rotating (no water) #169367gegsy
ParticipantRe: Bosch SGS43C12 – lower spray arm not rotating (no water)
Probably find that first problem had damaged PCB, does happen.
Greg
gegsy
ParticipantRe: Bosch SGS5312GB Not Heating
Hi
Not heard of that happening and can’t see how either. Even if relay had stuck “on” the thermal protection on heater unit would kick in.
Was it pcb that caught fire do you know?Greg
gegsy
ParticipantRe: Bosch WIT7420GB/08 Will not select
Thats a nice fault.
I would firstly check for earth leakage.
Failing that possibly a power module fault.
Boro might be able to shed more light on it 😉
Greg -
AuthorPosts
