gegsy

Forum Replies Created

Viewing 15 posts - 6,046 through 6,060 (of 6,724 total)
1 2 3 … 403 404 405 … 447 448 449
  • Author
    Posts
  • January 9, 2006 at 11:50 pm in reply to: Bosch SGS43A32GB/01 dishwasher/floorwasher!!! #160397
    gegsy
    Participant

    Re: Bosch SGS43A32GB/01 dishwasher/floorwasher!!!

    Hya aqua
    Module has a software change p/no 489494 to combat this

    Greg

    January 9, 2006 at 11:37 pm in reply to: indesit wd12 8 flashes #160172
    gegsy
    Participant

    Re: indesit wd12 8 flashes

    Glad to help softus. 😉

    Greg

    January 9, 2006 at 11:31 pm in reply to: Sharp microwave shuts down every 59 seconds?? #160391
    gegsy
    Participant

    Re: Sharp microwave shuts down every 59 seconds??

    Not well up on Sharp but a certain make we do have Magnatrons in which the ferrite rings crack causing similar fault. Remove and just look for any cracks in it, they are blatently obvious.

    Greg

    January 9, 2006 at 11:12 pm in reply to: New Neff w/m motor won’t work? #160257
    gegsy
    Participant

    Re: New Neff w/m motor won’t work?

    Martin
    I have had some motors where upon insertion of plug; one or two of the pins on the motor retract thus causing zero contact.

    Greg

    January 9, 2006 at 9:33 pm in reply to: Tellies #160207
    gegsy
    Participant

    Re: Tellies

    Martin wrote:

    gegsy wrote:
    PS – Engineer said steer clear of LCD; problems a foot 😯

    Not sure that’s true, I think it’s the other way round?

    http://www.somucheasier.co.uk/ed-plasma-lcd-tv-difference.html

    I will tell the TV engineer as he is adamant that there is a prob with the displays on LCD nothin major a few teething probs.

    Greg

    January 9, 2006 at 9:18 pm in reply to: DELONGHI RANGE COOKER #158128
    gegsy
    Participant

    Re: DELONGHI RANGE COOKER

    For your info and I will no doubt be corrected, the delonghi range and the CDA range are one of the same ❓

    Greg

    January 9, 2006 at 8:53 pm in reply to: Nobrot #160213
    gegsy
    Participant

    Re: Nobrot

    I watched Brot to the future at xmas 😳

    Picks Mikes coat up and legs it 😆

    Greg

    January 9, 2006 at 8:52 pm in reply to: Neff Oven Stopped Working #160243
    gegsy
    Participant

    Re: Neff Oven Stopped Working

    If they share the thermostat yes or possible selector melt down.

    Greg

    January 8, 2006 at 11:33 pm in reply to: Neff Oven Stopped Working #160241
    gegsy
    Participant

    Re: Neff Oven Stopped Working

    Hi
    The failure of the fan element would bare no connection to the grill element. A more common factor of the two is in play.
    Considering facts of your fault may I suggest repairs@ to get an accurate diagnosis.

    Thanks

    Greg

    January 8, 2006 at 11:14 pm in reply to: Neff Oven Stopped Working #160239
    gegsy
    Participant

    Re: Neff Oven Stopped Working

    Hi
    I take it you were on the fan oven selection when it blew a fuse??
    If so its most likely the circular element has failed -P/no 499003.

    The top element you can see is for the grill only and would not be activated under fan assisted cooking.

    See spares@ for part/s you may require.

    Greg

    January 8, 2006 at 11:03 pm in reply to: Neff Oven Stopped Working #160237
    gegsy
    Participant

    Re: Neff Oven Stopped Working

    hi megamarty
    We need full model number please. Jot all umbers off ratiing plate and we will be able to assist you further.
    Thanks

    Greg

    January 8, 2006 at 10:20 am in reply to: Smeg not completing cycle – No error codes. #160181
    gegsy
    Participant

    Re: Smeg not completing cycle – No error codes.

    Live testing of any components cannot be advised on this site for obvious reasons, even though it may be the most practical.

    Greg

    January 8, 2006 at 1:50 am in reply to: Tellies #160202
    gegsy
    Participant

    Re: Tellies

    In my day to day visitations of certain visual retailers, I have been told that the Panasonic plasma units have the best reliability and picture. Have had the pleasure of seeing the panasonic plasma HD in action with a HD player and its the dogs… Its like a moving photo taken with a decent camera, unbelievable.

    Greg

    SWMBO??

    Strife Who Must Be Obeyed ?? 😆

    PS – Engineer said steer clear of LCD; problems a foot 😯

    January 8, 2006 at 1:43 am in reply to: IPX4??????? #159963
    gegsy
    Participant

    Re: IPX4???????

    IPX7 be fine for Indesit dishwashers then. Batch name “Titanic”

    Greg 😆

    January 8, 2006 at 1:35 am in reply to: IPX4??????? #159961
    gegsy
    Participant

    Re: IPX4???????

    Im sure Ive seen IPX4 on either Zanussi or Bosch aswell 😕

    Greg

  • Author
    Posts
Viewing 15 posts - 6,046 through 6,060 (of 6,724 total)
1 2 3 … 403 404 405 … 447 448 449