[gegsy]

Re: indesit wd12 8 flashes

The appliance also hates being in a damp locations. The circuit board tends to have problems and under severe circumstances may flash over 😥

Greg

[gegsy]

Re: Smeg not completing cycle – No error codes.

Hi
The drain pump could possibly be jamming when the water is hot??
Model number will be on r/h edge of stainless door inner (sticker) just to give us more to go on. 😉

Greg

[gegsy]

Re: Bosch SMI2021 not filling with water….help please!!!

Glad you all sorted 😀

Greg

[gegsy]

Re: broke wind in a customers house???

You are kidding 😆 we love them; especially the little ginger varieties 😉

Greg

[gegsy]

Re: Bosch SMI2021 not filling with water….help please!!!

The metering hose is internal Danny, going from l/h metering tank to sump, a black ‘S’ shaped hose.

Greg 😉

[gegsy]

Re: Bosch SMI2021 not filling with water….help please!!!

Hi
This era seems to suffer from metering hose blockage, causing activation of aquastop unit.
There are also numerous other things aswell. As you say it is 15yrs old but still an excellent machine, however you could be just ploughing cash into an old nag; for one of better words.
Personally I would cut my losses and invest in a decent brand – neff,bosch,siemens,miele,smeg etc

Greg

[gegsy]

Re: smeg d/washer dwf 64sse

Hi Barry
Sounds to me like the diverter motor on the instantaneous water heater has given up.

Greg

[gegsy]

Re: neff s6409nogb/03 dishwasher

hi
Ive had a bosch doing similar and it was the PCB. On mine it was on the r/h base of appliance. Check model number again and I will route part number for you.

Greg

[gegsy]

Re: Bosch SG43A2GB/01

Hi squadman,
Can you please check your model number, as some models have had a software change in the control board and change to the flood mushroom assembly to combat this fault along with the sticky float which has now been disused in recent models.

Thanks

Greg

[gegsy]

Re: Bosch SGS6962GB/13 Cycle Stuck on 1 Minute to go

JoeBloggs wrote:Hi, I downloaded the exploded parts view for my dishwasher, however the descriptors are in German. Do you have part codes for the Instantaneous Water heater and Pressure Chamber so I can clean/check the correct parts please ?
Thanks
Happy Christmas btw 🙂

As Martin said they are there bit what the heck

Water heater – 483058 (Part change)
Pressur Chamber – 497570 (Part change)

Please see spares@ for prompt supply of spares

Greg

[gegsy]

Re: Bosch SGS6962GB/13 Cycle Stuck on 1 Minute to go

rachelwasher wrote:Hi Jo,

I don’t suppose it is any comfort for you to hear that my identical machine has an identical problem. My engineer reckoned that some inlet pipe thing was gunked up and causing the machine to think it was leaking so that it ran the pump continuously. The machine did then work for a couple of weeks (although the getting stuck on 1 minute problem remained) but it has now happened again. If you, or anyone else, has managed to fix this problem I’d love to hear how.

Rachel

Read my post above please

Greg

[gegsy]

Re: Recommended Listening

Martin wrote:I got an iPod for Christmas (lucky me eh?) and I bet Gegsy and Alex have the same tracks on theirs too?

I havent got an ipod, I have been a very naughty boy 😆
But have loads on PC and seeing as Im never away from its great.
Ipods sre great so small but sound is great innit Martin.

Greg

[gegsy]

Re: It’s dead!

Hya GB
We off till Monday 🙂 Its blinkin freezin here, glad Im not on the road 😉

All the best

Greg

[gegsy]

Re: Bosch WFL2260 drain filter stuck

Hi
The 3 screws are Torx20 (T20). 2 in bottom of front casing and the other one accessible when you pull soap drawer out and found at the 5 oclock position around dispenser aperture.

Greg

[gegsy]

Re: Bosch dishwasher SGS4002GB/20

Thats what I was thinking, never need a wiring diagram before, usually always human abuse 😆

Greg

Glad you sorted, Merry Christmas

[Author]

Posts