Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: Recommended Listening
How about some Heaven 17 ??
Greg
gegsy
ParticipantRe: Bosch beeping.
The signal for the “Option buttons” can be switched on and off. This requires that the programme selector is set to “coloureds 30 °C” and simultaneously that the “Start” button is pressed and hold down. When the signal sounds, the setting has been stored into the memory. The volume cannot be adjusted. When an additional function is switched on, a long acoustic signal sounds; when the function is switched off, the acoustic signal is short.
The signal for the programme versions can be switched off before the programme starts and at the end of the programme or set to a different volume. This requires the “Intensive”(Quick) button is pressed and hold down. Release the button at the required volume, the setting has been stored into the memory.HTH
Greg
gegsy
ParticipantRe: Bosch beeping.
No idea without a model mac in all fairness 😉
Greg
March 29, 2008 at 10:06 pm in reply to: Barclays Premier League 2007-2008 / Champions League #221934gegsy
ParticipantRe: Barclays Premier League 2007-2008 / Champions League
Especially for Jim http://www.youtube.com/watch?v=e1ToDTdM5-Y
Greg 😀
gegsy
ParticipantRe: Barclays Premier League 2007-2008 / Champions League
Nice 6 point lead there now Jim 😀
Greg
March 29, 2008 at 3:05 pm in reply to: BOSCH EXXCELL fridge freezer KGV32423gb01 not coming on #247261gegsy
ParticipantRe: BOSCH EXXCELL fridge freezer KGV32423gb01 not coming on
Should still be able to select temp and fast freeze on panel 😀
Greg
gegsy
ParticipantRe: Samsung RS21KGRS heater fault.
Yup and I would also transfer the defrost sensor and fuse also from the evap unit, making sure they are transposed exactly in the same place to the old evap in fridge section and secured sameway.
Unplug appliance first before attempting above 😉Cost of evap unit is app £80 😯
Greg
gegsy
ParticipantRe: Bosch SGS5342GB/17 HYDRO SENSOR
Hi
Maybe worth a look in the drain pump area as the pump maybe jammed.
Access as per manual, remove filters and locate housing cover held in by a torx 20 screw. Remove screw and cover and inspect recess thoroughly.Greg
March 29, 2008 at 2:31 pm in reply to: BOSCH EXXCELL fridge freezer KGV32423gb01 not coming on #247258gegsy
ParticipantRe: BOSCH EXXCELL fridge freezer KGV32423gb01 not coming on
Hi
Definately module as it has a straight feed from mains switch.
P/no is 493483 £48.77+ VAT from BSH 😀Greg
gegsy
ParticipantRe: Bosch tumble dryer WTA3100
Hi Sprat
Thank you for your comments :rolls: .
You may be blessed with basic skills to fault find, the next readers of this post may not.
It wasn’t meant to sound condescending in any way, just making sure you guys are safe 😉Greg
gegsy
ParticipantRe: Bosch WFB 2004 – access to control knobs
Hi
Dial behind window (one with prog letters on etc) only comes with complete fascia 😥
The knob and cam come seperately, they also come complete with fascia fyi 😉 .Fascia p/no is 350356 available from spares@ukwhitegoods.co.uk
Greg
gegsy
ParticipantRe: Bosch Exxcel 24467 plastic door catch
Hi
I can count on one hand how many door catches I have changed for Bosch in the last 10 years, if that helps 😉Greg
gegsy
ParticipantRe: Bosch tumble dryer WTA3100
This is a public forum so a fair few would be unqualified TBH.
Rule of thumb as far as UKW is concerned for future readers, is unplug appliance before taking any lids or panels off and definately NO Live testing.Gegsy (UKW Moderator)
gegsy
ParticipantRe: Bosch tumble dryer WTA3100
Whoa there Lee ❗
We don’t need to be advising live testing in a public forum now do we 😉
Also if he is going to lift the lid, surely he should unplug the appliance first :plug:Greg
gegsy
ParticipantRe: Bosch tumble dryer WTA3100
Hi
Start with the socket the dryer is plugged into, ie- plug another appliance in it to see if you are gettin mains from it.Greg
-
AuthorPosts
