Hooch

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 28, 2009 at 2:16 pm in reply to: Whirlpool AWM029 washer stopping mid-cycle #278090
    Hooch
    Participant

    Nothing happens at all – water comes in and some of it drains away but the drum doesn’t move…

    February 25, 2009 at 10:49 pm in reply to: Whirlpool AWM029 washer stopping mid-cycle #278089
    Hooch
    Participant

    Will give that a go… Thanks 🙂

    February 25, 2009 at 5:19 pm in reply to: Whirlpool AWM029 washer stopping mid-cycle #278087
    Hooch
    Participant

    Re: Whirlpool AWM029 washer stopping mid-cycle

    Any thoughts – DIY/engineer/new machine??

    February 23, 2009 at 11:34 pm in reply to: Whirlpool AWM029 washer stopping mid-cycle #278086
    Hooch
    Participant

    Re: Whirlpool AWM029 washer stopping mid-cycle

    Yes, a little water still in. Not the full amount, but definitely some (you can open the door without it spilling out). I’ve checked the filter and the pipe where it drains into the u-bend, and they’re clear.

    February 1, 2009 at 9:37 pm in reply to: Whirlpool AWM029 – door lock/unlock problem #275903
    Hooch
    Participant

    Re: Whirlpool AWM029 – door lock/unlock problem

    Penguin45, you are truly wonderful! Will order part and give it a go. Thanks again! 😀

    February 1, 2009 at 8:59 pm in reply to: Whirlpool AWM029 – door lock/unlock problem #275901
    Hooch
    Participant

    Re: Whirlpool AWM029 – door lock/unlock problem

    Thanks for the prompt reply! Is this a straighforward job that I could fix myself or is it best to call for an engineer? I can’t quite make out which bit the part is…

    August 17, 2006 at 9:04 pm in reply to: Electrolux ESI 604 – not filling #185398
    Hooch
    Participant

    Re: Electrolux ESI 604 – not filling

    Well, checked the transfer hose (and some other hose) – it wasn’t blocked at all. Don’t know what happened, but it seems to be working now. Maybe it was the shock of being moved/switched off. Anyway, thanks for all the tips and advice.

    August 17, 2006 at 9:07 am in reply to: Electrolux ESI 604 – not filling #185396
    Hooch
    Participant

    Re: Electrolux ESI 604 – not filling

    Thanks. I’ve removed and cleaned the blue tubes and spout. The machine still doesn’t fill. Is it worth trying the transfer hose? This could be a pain, as obviously it’s an integrated machine, but if there’s a chance it would do the trick, I’ll try it.

    Cheers,
    Hooch

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)