Forum Replies Created
-
AuthorPosts
-
Houseproudtim
ParticipantLegend. Thanks very much.
house.proud@ntlworld.comHouseproudtim
ParticipantThanks
wfe2B19xuk
769991004002Houseproudtim
ParticipantI’ve got one with the same problem, I’m guessing it’s the pcb, not sure whether to risk ordering one.
Houseproudtim
ParticipantRe: Neff/Bosch dishwasher heater replacement.
How old is it? both versions its a base off job. I lay old style on left side and hinge base from back to allow access, newer version is on its back. Dry the sump out first so you don’t get water where it shouldn’t be. Sides off to reveal screws/clips for base, and remove door springs as well.
Houseproudtim
ParticipantRe: Siemens SN26T297 dishwasher distributor
Yes it’s same procedure as a heat pump, base off.
Be careful with the o ring seal when fitting. I generally use a very small amount of washing up liquid to seat it correctly as they can kink up if you are not careful. Push on first then twist.Houseproudtim
ParticipantRe: Bosch/Neff dishwasher heat pumps
Thank you guys.
-
AuthorPosts
