[hvc123]

Re: SMEG DF614WE unable to start or change program

anybody else actually view this forum ?

[hvc123]

Re: Ikea Whirlpool DWF 415 S persistent F2 error (overfillin

Out of interest what was that forum? I may get sone help too

[hvc123]

Re: Smeg Dishwasher door will not open – mechanical issue

Hi if its like my smeg you should be able to get. The door catch by taking the top off

[hvc123]

Re: SMEG DF614WE unable to start or change program

Ok so a quick update.. I have ruled out the door switch (bypassed that) it seems that on the main board there is a plug with 2 blue wires that if I unplug I have control of the dishWasher again ( woohoo) but no the cycle starts and drains the old water then fills and about 5 mins into the wash the machines errors with an e8 I.e unknown wash error and goea and empties the washer. I’m assuming the 2 wires I pulled out are for the heater. So I thought maybe its mpaning because it can’t heat the water so I plumbed in the hot water and I get the same error.

Any1 have any ideas please

[hvc123]

Re: SMEG DF614WE unable to start or change program

anyone know if that is possible or is it a case of ordering a new soap tray, then door lock, then possibly a pcb ?

ta

[hvc123]

Re: SMEG DF614WE unable to start or change program

just wondering if anyone knows if its possible to loop the 2 wires together on the sensors to prove if the sensors are broken or not, seems an expensive route to change things willy nilly. ta

[hvc123]

Re: SMEG DF614WE unable to start or change program

yer i tried that too nothing happens. i have the empty salt light on the empty rinse aid light on (this sometimes goes off even though theres no rinse aid in it) and the second program light.

[Author]

Posts