Forum Replies Created
-
Posts
-
Re: hotpoint aquaries wma54
so far so go iadom, it looks like it was the clear pressure hose. ty.. it has now used all my hot water for dishes lol. what happens if their is no hot water , will the programme stop, has this machine no heating element, are these old machines? if you have the time
have you certain procedure you follow when working with appliances?
isit years of expierience along with customer telling you whats not working, or isit i.e washing machine broke can you fix it and whats your methodical approach ….
Re: hotpoint aquaries wma54
i just had inlet valve off and they are stiff, but can be pushed with finger , but dont spring in and out,
ialso found clear tube from back of soap tray was disconnected to circle component, probably happened in transit, put it back on now anyway
Re: hotpoint aquaries wma54
yes connected hot and cold, from reading through site, inlet valve is only thing standing out… will i find this at the rear, under the hood, where pipes are connected too…
what a day…. cheers…. ty
Re: washing machine taking out the trip
after reading a little im leading towards a solinoid valve, but im sure you know where im guessing, i like what you say disconnect bits and see if increases
Re: flavel 100 aspen dual cooker
hi kwatt, was just wondering if you have seen this problem happening since last time i posted.
yes still havent got round to fixing it..
im still on for the thermal fuse gone for left hand oven.
thanks.. trev
Re: new member
i know its been a long time since ive fixed this.. but thought id update anyway and if helps anyone else .happydays..
i had taken the back and and the drum off in one swoop, which i think was wrong way todo.. but i got new belt on with two people and some serious cuts to the hands when it spining the drum round to get on…. maybe somone else will top this up and tell me a proper way for next time.. sparky.
Re: flavel 100 aspen dual cooker
i have found this info on the web kwatt, and was wondering if it rings any bells with yourself..I had the same problem real easy fix
The thermal fuse is at the rear behind the oven.
First remove the rear panels, you will need to take the middle cover off first then you can take off the lower rear panel, as its the left side (looking from the back) you will have no problems with the mains connector as its on the other side.
Once the rear panel is off you need to look for a brown wire, at some point on the wire you see some red or black rubber heat shrink. Remove the heat shrink by sliding off to one side or just cut it. now the thermal fuse is exposed its only a small thing and you can get a replacment Idealy you should crimp or solder it in if not use chok block and cover it in insulating tape.Re: flavel 100 aspen dual cooker
IS THERE A COMUTATOR SWITCH FOR EACH OVEN…AS ONE OVEN IS STILL WORKING?? WHAT YOU THINK ABOUT THE THE CLOCK AND IGNITOR BEING POWERED OF THE BROKEN OVEN..???
Re: flavel 100 aspen dual cooker
well my test leads ar gs38 compliant 😀 but i see whT YOU MEAN DONT DO IT IF DONT HAVE TOO. CHEEERS. DO YOU KNOW WHERE I CAN FIND ALL THESE PARTS. DOES THE BACK HAVE TO CME OFF, SIDEES??? IS THERE A DIAGRAM YOU CAN POINT ME TOO??
DO YOU APPLIANCE ENGINEERS LEARN FROM EXPIERIINCE OR DO YOU WORK FROM DIAGRAMS FOR EACH MODEL….
IVGE CHANGED BELTS HEATING ELEMENTS ETC ON WASHING MACHINES ETC..
I THINK IT IS LIVE AND LEARN AM I RIGHT , THX HAPPY NEW YEAR SCOTLAND
Re: flavel 100 aspen dual cooker
well im still coooking the roast on one side… so gathering info before i attack.
im going to check for voltage at element and if theres voltage il suspect the element. and i think the element should be 18 ohms, not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} tho…. but that still leaves the clock on front and the ignitor…. but maybe they run off the element. thanks for re0plying
