johnboy

Forum Replies Created

Viewing 4 posts - 31 through 34 (of 34 total)
1 2 3
  • Author
    Posts
  • February 21, 2005 at 10:45 am in reply to: Zanussi Condenser drier won’t go! #125169
    johnboy
    Participant

    If appliances are under 15 months old Zanussi will generally authorise a Service Force engineer to call and Zanussi will pay for the parts. If you are persistant the labour costs too.

    February 18, 2005 at 3:50 pm in reply to: Zanussi skips wash to last 3 mins of programme #126387
    johnboy
    Participant

    Re: Zanussi skips wash to last 3 mins of programme

    E85 USUALLY ENTAILS THE RECIRCULATION PUMP OVERHEATING CAUSING THE MAIN PCB TO BLOW.check recirc pump first or you might incurr paying for 2 pcb’s. :

    February 18, 2005 at 11:22 am in reply to: Zanussi Fridge Freezer keeps defrosting #126399
    johnboy
    Participant

    Re: Zanussi Fridge Freezer keeps defrosting

    Is the appliance in an area of low ambient temperature of 10 degree or less If it is it may need a ambient heater fitting to it. The other concern is the smell ! Is it an electrical smell. It is known for the thermal cut-out stats to overheat. These are situated behind the rear panel in the freezer; worth checking !!!Disconnect plug first!!!

    February 15, 2005 at 3:30 pm in reply to: Fault code for aeg fridge/freezer #126094
    johnboy
    Participant

    Re: Fault code for aeg fridge/freezer

    F5 fault code relates to incorrect resistance value on the fridge evaporator sensor. Corresponding readings are at 0= 32.51k ohm, -10=54.89,-20=95.89,-30=173.9k ohm.Readings are taken from the edge connector at the board in the top panel. Hope this helps ❗

  • Author
    Posts
Viewing 4 posts - 31 through 34 (of 34 total)
1 2 3