Forum Replies Created
-
Posts
-
yes you need a thermal cut out part number 8996619267611. When replacing appliance must be disconnected from the electrical supply.
you require part number 8996619267611
Disconnect appliance from electrical supply before carring out any work.pressure switch part no.1526370000 should sort out the problem located at the front right hand side (remove r/h panel) for easier access
If prewash light on the left hand side is flashing this indicates that the child lock is activated. To deactivate press the second and fourth auxiliary function buttons for three seconds
How old is the appliance. To be honest you would be better calling in Service Force as there are a number of issues that can cause this problem relating to a blockage in the Intergrated Water Management System on the left hand side of the appliance.
part number is 2262170034 cost £19.81 inc.VAT
Not as straight forward as it may seem. See Repairers@ in your areaIf the wash and drying phase lights are flashing on this model then the following has or may have occured
a) Leakage from the various connections
b) Floating sensor blocked mechanically
c) Float microswitch faultyI suggest you get in touch with crossley, advise them of the letter and suggest “they” arrange for a Service Force engineer to call and repair the appliance at their expense. Call customer service on 01422 200660
Problem is due to faulty sensors (part no. 2147168013) quite a common problem. An alternative supplier was sort by Zannusi so they will be slightly different to the original in appearance.
product number off the rating plate would be useful as numerous varients of this model have been produced
