[Johnokent]

Re: Indesit board connections

ok, thanks for help Martin.

John

[Johnokent]

Re: Electrolux (Zanussi) EW1200 I No spin.

It was the module /Timer. Anyone know a good kitchen fitter?

Thanks for help.

[Johnokent]

Re: Electrolux (Zanussi) EW1200 I No spin.

Thanks guys, will try these points again today after I’ve demolished kitchen. Why do kitchen fitters build kitchens round appliances?

This one reminds me of of a while ago I went to change an element on a built in oven, not an odious task except the fitters had put the oven in then pulled all the loose cable back to the cooker point 5 feet away, under tiles,and cut it off! In the end I had to chase out the wall to remove the cable just to get the oven out. Expensive element change!

[Johnokent]

Re: Electrolux (Zanussi) EW1200 I No spin.

Thanks Dave

PNC is 914674010/01

[Johnokent]

Re: Indeset Dishwasher IDL 705

Further to last request, Questioned customer a bit more and she said she orginally had flashing lights telling her filter was blocked and had actually bailed machine out manually and started it again. She said It went for a short while and stopped again. The indicator light was not a fault light but just the cycle progress indicator. The reason it stopped there was the pump had seized. Bone stuck in it! cleared this and all worked well.

Thanks for help.

[Johnokent]

Re: Firenzi Ovens

Thanks for rapid reply Dave. Will put this to custoter and see what they want to do.

[Johnokent]

Re: Rosieres Cooker

Ok thanks for help, Carry most of these lets hope one will fit.

Thanks again.

[Author]

Posts