Forum Replies Created
-
Posts
-
Re: ADG7470/1 Flashes 8 times
Hi I have one of these doing the same thing. Did you manage to sort it ?Any help would be appreciated, thanks.
Re: Hotpoint WDPG8640X
Thanks kaibart, I have not looked at the ntc’s. I have checked the elements for earth leakage.
Re: Hoover Vision HD
Invensys Module- Missing water heating defective NTC Probe & or defective water heating element or wiring
MDL module- Defective Cuore Control Module or wiring.
Re: bosch WTE84107GB/02 dryer
The IC was a TNY266PN which is on the main pcb on the WTE86304, worth a check to see if its the same IC on the WTE84107GB.
Re: bosch WTE84107GB/02 dryer
Sound just like the fault I had with WTE86304GB/05 which was the switch mode IC which you can get from CPC. See my posts for this Model
Re: bosch dryer
Before I changed the IC I ran the dryer until it went dead, approx 10-15 mins. Changed the IC & ran the machine for 1 hour, didn’t stop. Seems OK. Hope it works for everyone else. It looks like this IC or a similar one is used in other white goods modules. It controls the switching of the AC mains to the low voltage transformer feeding the contol circuitry & display.
Re: bosch dryer
OK, think I have solved this one. Having spent some time fault finding the PCB I have replaced the IC TNY266PN which is controlling the switching in the AC DC power supply. Cost £1-74 from CPC. The Dryer is now operating normally. Hopefully customer should be happy, not having the expense of replacing the expensive PCB (£202-00 from Bosch) or buying a new dryer.
Re: bosch dryer
Ive got one of these today. After 10-15 mins goes dead no lights on panel, checked power to PCB, OK. Anyone got a cure for this without changing the PCB (£220) would be appreciated.
Re: Bosch SGS66A02GB/21 Dishwasher Tripping Out
More than likely the mains filter. Visually inspect for black soot marks.
