[jtheobald]

Yes, 28 (1.2), 85 (2.3). I am assuming I need all sensors connected but the heater element out of the machine?

[jtheobald]

Dave, first of all, you have been fantastic, many thanks. I am getting a reading of 113.8 which seems to imply the heater is fine. I suppose the only thing I haven’t checked is the other sensor on top of the heater.

[jtheobald]

Thanks Dave, I get your point but as the sensor was only £18 I thought I’d give it a chance. The other sensor under the heater is 0 ohms. I am now wondering about the heater as even though the dryer goes for a couple of mins there appears to be no heat when I touch the casing.

[jtheobald]

Hi,

Replaced the sensor which has the red dot as shown above but no difference, no you recommend replacing the other sensor next to it?

John

[jtheobald]

Hi Dave, Which one is the overheat stat? I have two sensors on top of heater element; one with a red dot on it. And one sensor which is approx 6 inches below heater element?

[jtheobald]

electrofix wrote:well before anyone can comment we would need the Enr ans FD numbers so we know which machine it is

have you looked in the owners manual for clues ?

Dave

Hi Dave, fair comment.

WTV74306UK/11 FD 9002 200135

Manual only talks about cleaning out machine.

John.

[jtheobald]

Re: Neff Dishwasher

Thanks. It appears to have been a blockage as once the cleaner had worked through the system and returned to working order.

Many thanks, all post really appreciated.

[jtheobald]

Re: Neff Dishwasher

If I manually pour water into the machine it replaces whats in the matrix up to the same level and nothing more – dont know if this is a bit of a clue?

[jtheobald]

Re: Neff Dishwasher

Afraid not, I reseated everything and it hasn’t made a difference.

[jtheobald]

Re: Neff Dishwasher

Hi,

Thanks for quick reply. To be clear this is the little white pull cover in the bottom of machine?

[jtheobald]

Re: De Dietrich – Controller dead

Cheers Pete, that could well be the case as the wife had just finished an automatic clean at high temp.

Time to call out an engineer me thinks.

John.

[jtheobald]

Re: Neff K4663 fridge freezer

Further update. I took the FF out and cleaned the back element. I defrosted it at the same time. The fridge is now running hotter, the freezer does seem to be working. I still cannot see how the air gets from the freezer to the fridge?

[Author]

Posts