[kirkie]

Re: Fabric Softener Not Going Through

Penguin45 wrote:This is the Samsung, yes?

If the syphon is working when you fill it manually, then logically it isn’t getting water when it’s in the machine. Check the holes in the roof of the soap box.

Penguin45.

Yes that is slimey and scummy as I don’t know what. What is the best way of cleaning that?

[kirkie]

Re: Samsung P1253

Penguin45 wrote:You need to remove the drawer fully and strip out the syphon cap. The cap and tube will both need thoroughly cleaning.

Penguin45.

When I pull out the drawer it has a small blue square thing that can be removed and cleaned. Is there anything else?

[kirkie]

Re: Samsung P1253 Problem

Mac1982 wrote:Glad to hear.

In case you werent aware, the repair on the unit carries a 3 month warranty with is separate from the manufacturing warranty itself.

Thanks for that…

[kirkie]

Re: Samsung P1253 Problem

I’m all sorted now. Engineer has been fixed the problem I thought it was. Still under warranty and I didn’t have to have proof of purchase..

[kirkie]

Re: Samsung P1253 Problem

Mac1982 wrote:The unit is under a 2 year warranty from samsung

Any unit purchased prior to 01.05.2006 has this warranty. Anything after that is a 12 month warranty

Thanks for that. This has just been confirmed by Samsung and I get an engineer on Wednesday.

[kirkie]

Re: Samsung P1253 Problem

Sods law I think it is out of warranty as it was bought January 2006…. 😥

[kirkie]

Re: Samsung P1253 Problem

Penguin45 wrote:Or this:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=651
Or, if you can wield a screwdriver with aplomb:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=165

Once the impellor comes off, it will not stay back on, so replacement is your only option.

Power off, if you’re going to do this yourself.

Regards,
Penguin45.

Thanks for the quick response. Is it easy to do or should I be looking for a good engineer in the Hull area…. 😯

[kirkie]

Re: Samsung P1253 Problem

This could be the thing

Drain Pump

[Author]

Posts