[kirkie]

Oh well I have decided to trade this in for a Hotpoint WMF760A

[kirkie]

Cheers… Might be a strange question, but I have just looked at were I put the salt and it is full of water. Is that normal?

[kirkie]

Re: Powdery limescale type substance

In your opinion then what is the best dishwasher tablet to buy then?

[kirkie]

Re: Powdery limescale type substance

I will give that a try. Cheers

[kirkie]

Re: Powdery limescale type substance

I live in East Yorkshire so yes….

[kirkie]

Re: Powdery limescale type substance

I have just wiped a bit that is on the bottom of the dishwasher with vinegar. It disappears, but then comes straight back… :rolls:

I have never used salt or rinse aid as I thought the tablets I bought were like an all in one…

[kirkie]

Re: Indesit ISL70C Condenser Dryer Help

kirkie wrote:I have looked for a Indesit ISL70C Capacitor on here and can’t find one. Can someone point me in the right direction please?

I have tried to turn it on this morning and it does nothing. All the lights come on, but no noise today….

Thinking that I might just give it up as a bad jump and buy another….

[kirkie]

Re: Indesit ISL70C Condenser Dryer Help

I have looked for a Indesit ISL70C Capacitor on here and can’t find one. Can someone point me in the right direction please?

[kirkie]

Re: Indesit ISL70C Condenser Dryer Help

iadom wrote:Very unlikely, it is possible to test with a meggar but TBH its cheap enough to take a punt on anyway.

Would need serial number to identify correct part as both 7uf & 8uf capacitors have been used on these machines.

Jim.

Cheers I will give it a go at the weekend…

[kirkie]

helo_75 wrote:nah its just the capacitor

if you take the right hand side panle ( looking from the front) its right next to the motor

part around £9 from online shop

I will take a look. Will I be able to see if that is the problem just by looking at it?

[kirkie]

Re: Indesit ISL70C Condenser Dryer Help

There is a slight hum. Is it an expensive fault and will it be cheaper to buy a new one?

[kirkie]

I am having this problem again and I have cleaned all of the holes. Any ideas please?

[kirkie]

helo_75 wrote:erm, except, like i told you, thats the wrong manual

the fault codes are different

Well it worked for me and the debris filter was shall we say disgusting….. 😉

[kirkie]

helo_75 wrote:front of machine bottom right hand corner

theres either a flap or its behind the kickstrip

hope this helps

Cheers I remembered before you replied, but if anyone needs help with this machine, have a look HERE

5E = Clean the debris filter. Make sure the drainage hose is installed correctly.

[kirkie]

helo_75 wrote:like i said, pumps blocked, or duff, one or the other

usually something in the filter

sorry, but the last bit of the model number makes all the difference

hth

Where is the pump and how do you clean it, because I have a feeling that could be it…

[Author]

Posts