Forum Replies Created
-
Posts
-
Re: LG WD1243
hope this helps
part no. 4036ER2003A for the bearing seal
part no. 4036er4002a for the tub seal
as said before nice easy job hotpoint style front of machine and then front plate off tub)
lgs part nos for bearing are
4280fr4048b and 4280fr4048c
lge at front for orders through connect.Re: Servis Quartz Power Boad Part No 4035
hi
give m@c a ring a get all of my old servis boards from them 4035 around £18 -20 trade with guarantee. Dave Bailey or Neal pilgrim (who originally worked for servis developing the electronics when they were good) tel no. 01922 478203. They are very quick.Re: SERVIS M495 FILL FAULT
Hi
Sorry about delay on reply
Hope this helps.
If there has been a leak then the flood protection has been activated. water collects in the base , fiited on the base is a large gey device internal to this is a spung that expands causing a plunger to fly out pushing air up a tube that leads to the end of the fill hose cutting the water off. In this state when the machine asks for water the control board sences the flow (there will be no flow) through the valve by the mens of a flow meter located on the back of the water valve. it will then abort . To reset look at the fill hose there will be a clear disk with a red button press the button and then retry, you will need to replace the spung (pt no.499010400)and press reset the plunger. and of cause repair the leak.
Good luck.Re: UK Whitegoods Meeting No.4 – Feb 2005
Hi Dave,
I know its a bit late but can you put me down to attend Sat only, can not afford to give up Friday(being a one man band and just completing my first year on my own), note to anyone who can attend Proctor and Gambles pesentation well worth it as i worked with them in my last appointment with a manufacturer i won’t name who i might be hanged when i show my face.Re: lg wd1253
Bit of a delay here but.
If the machine operates when you operate the door switch manually its got to be the door latch i have as the last reply, fitted many doors due to damaged door latches or somes times doors that look ok, i had to fit complete doors as thats all LG supply , The LG Web site is not perfect but all of the tech info is there one tip display all uk products and then scroll down to the one you require.
KnobbyRe: Servis Quartz Error Code
Hi,
On the first posted problem F7 was a tacho generated fault not a common problem need to check motor tacho and connections to power board bottom of machine(requires an engineer). (but has these machines are getting on a bit they do now give strange error codes with some times no reason).
Now to open the door with out power you need to slide a thin object (fish slice etc) between the door and cabinet in the area of the door hook middle right hand side of door. trying to push the hook to the left try pulling the door at the same time. it will need a bit of brute force.As far as old past it appliances i have hundreds and hundreds of quarz machines in my patch ranging from the early 1981 examples 600 range right up to the last big door Hitachi and saphire 1990/91. Even though some are now 20 years plus in age they are still going strong with many giving little problems.
KnobbyRe: New Asko washer drier..well I supppose it had to happen.
hi,
This US version is a merloni/servis 7 kg appliance , some might have seen it under the Servis name Grande or XL6. Asko Sweden has never produced a washer drier. Its a shame that the markerting brains of Merloni only see Asko as a way of breaking into the US, I will try not go on. One of the main reasons for Merloni buying Asko was that Asko had the contacts and experiance for passing the US approvels (UL).
Lets see what shape Asko will be in in the Us next year with this machine!
