Forum Replies Created
-
Posts
-
Re: Smeg Cooker F65 Door Micro Switch.
Thanks for the super fast response.
Special order with Connect. Cannot it be ordered from anywhere else?
Laurence
Re: Can Anyone Supply a Magimix 4200XL Food Processor?
Thanks Folks….for taking the time to respond.
I will ring them Monday.
Laurence
Re: Neff D/washer S5433XOGB/13 Recirc Motor Fitting
Most grateful for all your help.
Thanks
Laurence
Re: Neff D/washer S5433XOGB/13 Recirc Motor Fitting
Thanks Boro,
The motor is leaking into the base. Is it ok to just change the seal unit or does this get complicated with corrosion etc.
Laurence
Re: More New Faulty Elements
Many of the things stated here about dampness etc maybe true. But my original post (see top of page) was to do with a definite breakdown of the components immediately or within minutes of fitting ie. popped the house earth trip.
I have since been rung by a guy at Connect who confirmed this was a problem and indeed in the interim said if I needed an element and a pattern was not available I could have the genuine at the same price. That was a ironic since some pattern elements are more expensive than genuine.
I believe a particular pattern manufacturer is at fault and the problem is were the elements terminate with the little round ceramic insulator. Inspecting the duds the ceramic insulator sits skew at the ends with gaps around it. Elements with good terminations seem to have red sealant of some sort applied to were the ceramic terminator plugs into the element sleeve with a nice snug fit.
Laurence
Re: Hoover D/washer Door Handle..see photo
Hi Steve,
The part number you have given me is one my supplier recognises and has in stock.
Thanks very much for your effort and kindness in posting it here, it is very much appreciated.
I have acknowledged it here in the forum:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=13042
Thanks again.
Laurence 😀
Re: Hoover Slimline D/washer D7276 Door Handle
Hi Dave,
Posts must have crossed.
Yes as you can see it is the correct one, thanks.
Laurence
Re: Hoover Slimline D/washer D7276 Door Handle (Photo)
Hi
This is a photo of the part required. I understand the part number to be HVR09061938 or HVR680466. It is a special order with Connect and may even come back as obselete. Can anyone recognise it…have any of you veterans got one hanging about?
There should be a piece protruding from the middle but that is what is broken.
Thanks,
Laurence
Re: More New Faulty Elements
Thanks for your input.
These elements I mention above are probably super cheap but the ELE3721 is £14 from Connect so I certainly expect something better.
Laurence
Re: Bosch T/Drier WTA3204GB/09 No Heat?
Thanks Greg,
I found the `Dry` light was flashing.
I changed prog selection and the m/c started ok. Unfortunately the customer was not present so I did not have a pile of clothes to try. I did put in a couple of small spun towels I found. When tumbling I found the heating very intermittent but this may have been due to your assertion that small loads will be problematic.
The machine continued to work (rotate) on all progs whenever I started it and no flashing occured at all. I am awaiting customers feedback.
Why the problem occured in the first place I have no Idea. I was not able to ask if she was drying a small load.
Thanks again,
Laurenc
Re: Dyson
clivejameson wrote: they were both bought by a senior technician for Miele to be forensically examined at the Miele head office R & D lab!
When I read this post I instantly imagined those Miele tech bods rolling around their workshop like those aliens in the Smash powdered packet potato tv advert a good few years ago..remember `for mash get Smash`.I think you need to be quite old to remember that one 🙁 .
Laurence
