Forum Replies Created
-
AuthorPosts
-
leighhibon
ParticipantRe: Samsung washing machine WF1114XBD
Thank you very much.
leighhibon
ParticipantRe: Customer database/invoicing etc
Many thanks Leigh
leighhibon
ParticipantRe: Bosch dishwasher Heater 488856
Thanks Don
Leigh
leighhibon
ParticipantRe: Bosch dishwasher Heater 488856
Thanks Don
February 19, 2013 at 7:05 pm in reply to: Hoover Dishwasher HFI3015 32900199 (p1 flashing constantly) #390482leighhibon
ParticipantRe: Hoover Dishwasher HFI3015 32900199 (p1 flashing constant
Hi Martin, I will try this again. Thanks
leighhibon
ParticipantRe: Bosch SGS45E68GB/64 – Pulsing on fill
Hi Gadget, this usually is a fault with the pressure chamber, either scale or a micro switch. Cheers Leigh
leighhibon
ParticipantRe: ADP4501/5 Whirlpool Dishwasher
Hi, have you checked the pressure switch is clean, also inside it there is a rubber
Diaphragm that can be punctured. If either of these occur the pressure switch will not be activated. Hope this helps.February 19, 2013 at 6:05 pm in reply to: Hoover Dishwasher HFI3015 32900199 (p1 flashing constantly) #390480leighhibon
ParticipantRe: Hoover Dishwasher HFI3015 32900199 (p1 flashing constant
Hi there, the p1 flashes and audible beeping are continuous and cannot be stopped by holding any of the buttons in. Thanks Leigh
leighhibon
ParticipantRe: Whirlpool adp2315 d/washer
Thanks Don,
Leigh
leighhibon
ParticipantRe: Thermostat or Temperature Regulator?
Hi there, sounds like the thermal limiter in front exhaust section.
leighhibon
ParticipantRe: diplomat adp8322 dishwasher
Hi there, it is worth checking for any damaged/broken wires at the bottom edge of door where they go through into the base of the machine.
leighhibon
ParticipantRe: AEG L16850 91460530902 W/Dryer
Hi Martin, just to say thank you all sorted now. Turned out to be the sensor on the heating duct even though it seemed to read all ok with the meter. Cheers!
leighhibon
ParticipantRe: AEG L16850 91460530902 W/Dryer
Thanks Martin, just wanted to be sure as when I have ordered this in the past they have sent me the wrong sensor. Cheers!
leighhibon
ParticipantRe: AEG L16850 91460530902 W/Dryer
Are you referring to the sensor in the condensor black hose or the sensor on heater assembly duct itself? Cheers Leigh
leighhibon
ParticipantRe: AEG L16850 91460530902 W/Dryer
Fault code is E73 which I understand is the NTC sensor on heating duct which reads ok on meter. Any ideas please?
-
AuthorPosts
