Forum Replies Created
-
AuthorPosts
-
LittleMan
ParticipantRe: Hotpoit AQXGF149M Fault code F05
Jim thanks for manual. Sorry about the fault code should have looked in the manual been one of those days and this call is over 20 miles away so wanted to be armed with right info thanks again Les
LittleMan
ParticipantRe: Hotpoint AQGL 129 PI Only drains
Can anyone Help with this machine it will only drain unless you select short spin. We have lights on the no heat no spin and the drain. Can anyone help please
Thanks LesLittleMan
ParticipantRe: hotpoint aqxxf149piuk no power
johnnyj thanks for your reply but is their any other way to test it as do not have a console board Many thanks
LesLittleMan
ParticipantRe: Neff F5456X3gb/23 will not stop
First sorry about my last post but had one of those days did not meen to come across as rude.The first advice was to see if the heater relay was ok and no burnt tracking this was all ok and working as the heater came on when the dishwasher first started to work it filled up and washed then drained started to fill then stopped with the sound of the motor running and a humming coming from inlet solinoid on the water inlet chamber ? but no water in machine. Then set to rinse only all the way through stopped and beeped. set again would not do rinsing or main wash and the water level when it comes could be normal or very low but the water chamber has been cleaned out this was the first thing to be done.
LittleMan
ParticipantRe: Neff S5456X3gb/22 will not stop
MOD NO S5456X3GB/22 As i said a humming like a solenoid and the motor going with no water.
LittleMan
ParticipantRe: Neff S5456X3gb/23 will not stop
called to see this machine today no burnt out track hose and chamber clean . Sometimes it might fill to the right level and sometimes it won’t we have the hum of solinoid and curculating motor but the heater is working.
LesLittleMan
ParticipantRe: Neff F5456X3gb/23 will not stop
Thanks for your input but this d/w finishes the wash and heats up
LittleMan
ParticipantRe: Bosch w/m WAA24171GB/12 no start
Yes i have told her about the 2 years warranty but she did not send any paper work off so ? if they will not repair it can you help Les
March 31, 2011 at 9:00 am in reply to: Electris hob C N A Trading Appliances mod EC60T L comes up #347974LittleMan
ParticipantRe: Electris hob C N A Trading Appliances mod EC60T L comes
Can anyone tell me how to unlock this hob PLEASE
Manythanks LesMarch 28, 2011 at 1:57 pm in reply to: Electris hob C N A Trading Appliances mod EC60T L comes up #347973LittleMan
ParticipantRe: Electris hob C N A Trading Appliances mod EC60T L comes
Bryan can you tell me how to unlock this as it is in a rented flat and have no paper work on it Thanks Les
LittleMan
ParticipantRe: Hotpoint fdw60 Lights on fast 40 and delicate 50
iadon
Thanks for your reply phoned customer who said ******* machine down bottom of garden but thank you anyway then hung up. Thanks again LesLittleMan
ParticipantRe: hotpoint wd640 no water going to dryer
Thanks sorry .
LesLittleMan
ParticipantRe: hotpoint wd640 no water going to dryer
Yes Sorry
LesLittleMan
ParticipantRe: hotpoint wd640 no water going to dryer
Hi have changed valve . ? 240 volts to valve but have live
LesLittleMan
ParticipantRe: Hotpoint uy46xmk2 clock wireing diagram
Still no joy with this clock can any one tell me which wire goes on what 1a 1 2a 2 n7 L8 i have 2 linked reds 1 black 2 whites and a purple. And which wire goes on the main oven selector switch.
Les -
AuthorPosts
