Forum Replies Created
-
Posts
-
Re: golocal reactive
I am one of the idiots who has not been paid by this shower and to be honest the more l read the more annoyed l get . Now we are on about answering the phone in someones house . I can tell you l will take that call every time and if you are in the position to let it ring then good for you. Some of us are in the real world trying to make a living and while we have companys like this taking advantage there will never be a rich engineer.
Re: golocal reactive
This is in regard to Go Local. Before doing first job told them to pay me up front . They agreed and i did job and guess what they had not paid . Have phoned several times always going to do payment run but money never arrives . Now looks like small claims court . Deal with this lot at your peril.
Re: FisherPaykel drawer seal
Sorry just realised my email has changed have now updated.Please can you send it again thanks for all your help. Might be a Fisher Paykel expert after this …..not ! Cheers .
Re: FisherPaykel drawer seal
Sorry where is the lid . Do l take the drawer out to access it ?not done one before
Re: FisherPaykel drawer seal
Can you explain a bit more as the lid over the basket is fixed isnt it with the seal attached to it or am l missing something . Thanks for reply
Re: Bosch WFX2867GB/06 F12 Fault code
I sent the board back to BSH as l had set the board up correctly and they exchanged the board. When I fitted replacement board it worked ok.
Re: teka dishwasher undw655f1 poor wash
Have replaced a couple of the valve assy. for arm not rotating . Usually take them off old motors and then they work fine .
Re: Bosch WFX2867GB/06 F12 Fault code
Thanks for replies but checked heater and this machine does not have flood protection . With original pcb in machine on wash, motor seems to try and spin instead of wash. Really want to know if board fault and whether to send back to Bosch. Anybody
Re: Hotpoint WT960P counting down but not doing anything
Just to say thanks to everyone for there help and new board did the trick.
Re: Zanussi washing machine ZWF1240W E30 error code
Thanks for your replies .I have called back and checked motor and element again and they seem ok . I removed pressure chamber and cleaned the sump hose and chamber reassembled and it has worked touch wood .Will let you know if it keeps working .
