MARIO

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 56 total)
  • Author
    Posts
  • in reply to: superior technical services now covertxt uk ltd #439737
    MARIO
    Participant

    Re: superior technical services now covertxt uk ltd

    Thanks for reply . They have paid me now but what a hassle . Whats worrying is they have changed there name 3 times from November 2015 .Only way i would deal with them again is if they pay upfront

    in reply to: Zanussi ZDT5053 Dishwasher fault codes #418263
    MARIO
    Participant

    Re: Zanussi ZDT5053 Dishwasher fault codes

    Thanks for reply have you got what the fault codes represent or where can i find them

    in reply to: Bosch WAS28466GB/05 washing machine will not start #417713
    MARIO
    Participant

    Re: Bosch WAS28466GB/05 washing machine will not start

    yes thanks Martin have tried that and it still did not start .Have you any other ideas

    in reply to: Hotpoint FF72S not cold enough #416489
    MARIO
    Participant

    Re: Hotpoint FF72S not cold enough

    Thanks for the reply Bob but have looked behind back panel in freezer and its not iced up.Is it this model where it has to get to -15 before the evap. fan starts as the fan runs when in test mode but not when running normally and no faults present after carrying out test mode.

    in reply to: Hotpoint FF72S not cold enough #416487
    MARIO
    Participant

    Re: Hotpoint FF72S not cold enough

    Hi again can anyone help there must be somebody who deals with this rubbish.

    in reply to: Samsung RL41WGIS bulb replacement #413399
    MARIO
    Participant

    Re: Samsung RL41WGIS bulb replacement

    Thanks for the information and help much appreciated .

    in reply to: CDA Dishwasher stops and flashes fault code #412071
    MARIO
    Participant

    Re: CDA Dishwasher stops and flashes fault code

    Thanks for your help Dave

    in reply to: CDA Dishwasher stops and flashes fault code #412069
    MARIO
    Participant

    Re: CDA Dishwasher stops and flashes fault code

    That is the problem the light is flashing continuous no sequence, but the program you select changes to rinse light lit when it goes into the fault condition.

    in reply to: A return of the BAD old days #410472
    MARIO
    Participant

    Re: A return of the BAD old days

    Have fitted 3 miele pattern washing machine elements in the same machine in last 5 months. 2 in last 6 weeks from connect plus just ordered hotpolnt pattern belt 1194 and its too big but marked1194 so think that tells a story

    in reply to: fridge drain hole blocked on a Hotpoint FFA80 #409468
    MARIO
    Participant

    Re: fridge drain hole blocked on a Hotpoint FFA80

    Can anyone help with this problem ?

    in reply to: miele washing machine leaking w5740 #406025
    MARIO
    Participant

    Re: miele washing machine leaking w5740

    Thanks Seamy have replaced soap box top and machine working fine now

    in reply to: Candy CDI 1012/A80 Dishwasher continuous flashing P1 #403681
    MARIO
    Participant

    Re: Candy CDI 1012/A80 Dishwasher continuous flashing P1

    Anybody a Candy expert must be someone who repairs this stuff. Any advice gratefully excepted.

    in reply to: .Maintenance Direct #401207
    MARIO
    Participant

    Re: .Maintenance Direct

    Thanks for the replies looks like l dont have to worry

    in reply to: Servicenet #395334
    MARIO
    Participant

    Re: Servicenet

    They have phoned me too. Could l do a job for them . Told her yes if you pay me up front. She said oh no we cant do that. Was l surprised no. Do they think my memory is that short after Go Local took me for £ 200.00. The nerve of this shower beggers belief.

    in reply to: Daewoo FRS-U201AI keeps defrosting #394380
    MARIO
    Participant

    Re: Daewoo FRS-U201AI keeps defrosting

    Any Daewoo fridge freezer experts or even just service manual would be a help cheers

Viewing 15 posts - 1 through 15 (of 56 total)