markmark

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Which Bosch Dishwasher would you recommend? #220886
    markmark
    Participant

    Re: Which Bosch Dishwasher would you recommend?

    Thanks for the advice Redflame. I had a look on the John Lewis website and they sell them there.
    Out of interest the more expensive dishwashers seem to be Miele. Do you have any knowledge of these? If given the choice would you go for Bosch or Miele?

    Mark

    in reply to: Beko WM1412 drum not turning/spinning #192268
    markmark
    Participant

    Re: Beko WM1412 drum not turning/spinning

    Took the brushes out and they were indeed worn down, not as much as I would have thought but still only 6 or 7mm left.

    Gave a quick clean and put them back on and the WM is working again now, though I will probably have to buy a new set fairly soon.

    in reply to: replacement pipe? #190432
    markmark
    Participant

    Re: replacement pipe?

    http://img154.imageshack.us/my.php?imag … hereq8.jpg


    I’m getting no where trying to find this part, cant get through to the parts dept or anywhere else Beko related for that matter. parts@ukwhitegoods cant tell what the part is as the pictures they have from Beko are terrible.

    I’ve put a picture up of the part I need, its the small pipe with the black line down the middle.Who would have thought a small pipe could be so hard to replace.

    If anyone can help It would be much appreciated.
    Mark

    in reply to: dishwasher parts diagram #190483
    markmark
    Participant

    Re: dishwasher parts diagram

    Hi, yes I agree this site does a fantastic job and I would at times be lost without the help of others.

    It just helps with anything to have a basic knowledge of the working parts and to see what they do. I havent come across anything but the most basic diagrams.

    Ive seen the Haynes manual in shops and may well buy one.

    Thanks guys.

    in reply to: replacement pipe? #190431
    markmark
    Participant

    Re: replacement pipe?

    Thanks for your help, I’ll send an email now. Mark

    in reply to: replacement pipe? #190428
    markmark
    Participant

    Re: replacement pipe?

    Ah yes, didnt think it would matter too much as it seems like a universal pipe.
    Its a Beko D3731 dishwasher.

    The pipe is only about 150mm long, 12mm diameter, connected to a arm on the clear water holder (sorry Im not sure of many of the part names) and going into a large black pipe from the motor, just below the centre of the machine.

    The dishwasher was in the house when we moved in and wasnt working, everything sounded fine but it wasnt filling up with water. I thought it may have been the water inlet valve but when I took the bottom off I seen a mouse/rat had eaten this small pipe.

Viewing 6 posts - 1 through 6 (of 6 total)