Forum Replies Created
-
Posts
-
Re: Elba PXDO60 main oven failure
Problem turned out to be a failed thermostat.
Thanks for the advice, all.Re: Elba PXDO60 main oven failure
Thanks, Dave – very helpful.
Element looked as though it had failed (there was damage similar to the photos on this site), but perhaps it blew the selector when it failed, or vice versa? Either way, I suspect changing the loom etc is going to be too big a job for me. Time for professional help.Re: Elba PXDO60 main oven failure
Jonah wrote:If it has a selector switch (different oven settings) it will need replacing along with the complete wiring loom, common fault with Elba/De Longhi range cookers
Thanks for the suggestion, Dave.
The only control on the main oven is the temperature control. Could this be the problem? (there is a selector switch on the upper oven, but that oven works fine)Re: Elba PXDO60 main oven failure
Element replaced, but oven still not working.
Any thoughts please? (Fan still working as before)Re: Elba PXDO60 main oven failure
Great – thanks v much, washtronics.
Had lots of fun dismantling cooker (removal of back required), and confirmed damage to element.
Will replace.Re: elba pxdo 60 Excellence – top oven door problem
Thanks, Penguin45
Got there eventually – by ignoring the instructions in the manual and trying different ways until I could get the notch in the hinges to locate, *and* the support arms in place, at the same time.
I also noticed the door was thicker at the top than the bottom: by dismantling and reassembling it, and slightly realigning the plate that the knobs are in, I managed to get the whole thing flush too.Re: creda lower oven fault
probably more than value of cooker then 😥 perhaps time to think of scrapping it
Re: creda lower oven fault
Thanks for the advice 🙂 Model number 49708. I’ll try to have a look at stat & doorswitch when I get a moment.
