Forum Replies Created
-
AuthorPosts
-
November 12, 2009 at 10:33 pm in reply to: Bosch exxcel 1200 (WFO2465GB) – stays on wash cycle… #302928
mrORS
ParticipantRe: Bosch exxcel 1200 (WFO2465GB) – stays on wash cycle…
I ran a wash cycle again – you are correct the water is not heating.
Checked the element – measured 24 ohms. This isn’t open circuit. Is it the correct value?
The machine also seems louder when motor is running – a whirring/clicking sound? and I dont think it is spinning at full speed as when the washing comes out it is wetter than usual….
Any ideas?
thanks
mrORS
ParticipantRe: Bosch Exxcel 1200 (WFO2465GB) drum not turning.
Parts arrived day after ordering, got fitted (yes access is awkward…but I’m only an amateur…), and hey presto! one working washing machine! 😀
Thanks for the advice.
M.mrORS
ParticipantRe: Bosch Exxcel 1200 WFO2465GB/01
Ordered new pump (great parts service) – arrived 2 days later. Fitted in 45mins – runs like a dream with no problems since.
Thanks for the advice guys! 😀
mrORS
ParticipantRe: Bosch Exxcel 1200 WFO2465GB/01
Thanks. Drained machine, checked pump no blockage. Tried spin cycle and it worked (?) has worked for a couple of days…then stopped again. Looks like an intermittent fault on pump as it is a bit noisy at start up after stopping…time for a new pump I think. 🙁
-
AuthorPosts
