number9

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 5, 2015 at 10:22 pm in reply to: Indesit IDC75 Belt trouble #421954
    number9
    Participant

    Re: Indesit IDC75 Belt trouble

    Got it all sorted. many thanks. Fan cover came off quite easily prised away with flat screwdriver. Fan came off easily after removing spring clip.Went back on easily. Had a bit of a struggle with getting the 2 self tap nuts off and on again but this was due to me faffing about with a small adjustable spanner and pliers. Like all the advice says, attach the furthest away bolt first then it is easy to manouevre the belt on the wheel then offer the plate to screw in the second nut.

    May 4, 2015 at 11:09 pm in reply to: Indesit IDC75 Belt trouble #421952
    number9
    Participant

    Re: Indesit IDC75 Belt trouble

    thanks. are there any preferred leverage points/access areas? I’m just a bit scared of breaking the thing if too much gentle persuasion is applied…

    May 4, 2015 at 7:31 pm in reply to: Indesit IDC75 Belt trouble #421950
    number9
    Participant

    Re: Indesit IDC75 Belt trouble

    how do you get at the jockey pulley to replace it? How do I get the fan cover off?

    January 8, 2012 at 7:37 pm in reply to: HOTPOINT WML540P – excessive spin noise (bearing?) #366395
    number9
    Participant

    Re: HOTPOINT WML540P – excessive spin noise (bearing?)

    thanks. It’s disappointing that these machines are effectively “disposable” these days. I’ve bought a new machine…

    July 5, 2009 at 12:43 am in reply to: WHIRLPOOL AWO 3551 flashing door lock light #291068
    number9
    Participant

    Re: WHIRLPOOL AWO 3551 flashing door lock light

    Would brushes problem cause the door lock light to flash? I’m just trying to find out what set of circumstances cause the flashing light.

    ps I’ve no practical knowledge whatsoever !


    thanks for your help.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)