OLLIE2806

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 153 total)
1 2 3 … 9 10 11
  • Author
    Posts
  • July 29, 2013 at 1:31 pm in reply to: LG WM1480FHD LE fault #398297
    OLLIE2806
    Participant

    Re: LG WM1480FHD LE fault

    Thats what I’m
    Thinking. Thanks mate.

    April 28, 2013 at 9:01 pm in reply to: Hotpoint CTD40G Pump #394307
    OLLIE2806
    Participant

    Re: Hotpoint CTD40G Pump

    Thanks, it is different to the one that’s on there but I take it that’s because the old pumps obsolete?

    March 12, 2013 at 7:54 am in reply to: 2x Beko DC7041W – No Heat & No Drum rotation #391855
    OLLIE2806
    Participant

    Re: 2x Beko DC7041W – No Heat & No Drum rotation

    Thanks guys, I cant see anything other then an NTC on the non heating one which seems fine – its really strange.

    And the push start one has already had the modification kit fitted, so i tried 2 different (new) caps on it to no avail.

    March 7, 2013 at 9:13 pm in reply to: AEG S75358 KG3 sensor part numbers #391720
    OLLIE2806
    Participant

    Re: AEG S75358 KG3 sensor part numbers

    Thanks mate, Thats them.

    January 18, 2013 at 7:51 am in reply to: Electrolux ESL614 Over heating? #388160
    OLLIE2806
    Participant

    Re: Electrolux ESL614 Over heating?

    Thank you! Much appreciated.

    December 20, 2012 at 9:05 pm in reply to: Siemens SE20T293GB/04 Cutlery Tray #386651
    OLLIE2806
    Participant

    Re: Siemens SE20T293GB/04 Cutlery Tray

    Thanks Martin, I thought I got the right one off there when I ordered it, i have had a quick nose but thought it was the same. I’ll have another look.

    December 10, 2012 at 5:53 pm in reply to: Indesit WIDL 126SUK Wrong PCB? #386020
    OLLIE2806
    Participant

    Re: Indesit WIDL 126SUK Wrong PCB?

    Excellent, Thanks Very Much!

    I take it the Connector from the heater motor just goes squeezes onto J14 on the board? seems a tight fit?
    (im only placing it on a spare PCB i have here just to see how it would go)

    Thanks

    December 10, 2012 at 4:52 pm in reply to: Indesit WIDL 126SUK Wrong PCB? #386018
    OLLIE2806
    Participant

    Re: Indesit WIDL 126SUK Wrong PCB?

    Im due to fit this conversion kit tomorrow where do the wires etc go? is it straight forward as there is no wirng diagram come with it.
    Thanks

    December 10, 2012 at 4:01 pm in reply to: Stoves 61EHDO – Uneven cooking #365087
    OLLIE2806
    Participant

    Re: Stoves 61EHDO – Uneven cooking

    I’m pretty sure I just changed the fan element mick and that cured it.

    December 7, 2012 at 4:14 pm in reply to: Indesit WIDL 126SUK Wrong PCB? #386017
    OLLIE2806
    Participant

    Re: Indesit WIDL 126SUK Wrong PCB?

    Cracking. Thank You

    December 4, 2012 at 12:06 pm in reply to: Bosch SGS43T72UK/26 keeps filling? #385802
    OLLIE2806
    Participant

    Re: Bosch SGS43T72UK/26 keeps filling?

    Cracking stuff, thanks Martin.

    December 2, 2012 at 7:12 pm in reply to: sms50e06gb/02 Dishwasher Upper spray arm part number? #385689
    OLLIE2806
    Participant

    Re: sms50e06gb/02 Dishwasher Upper spray arm part number?

    Thanks Claysie, Much appreciated.

    July 12, 2012 at 6:56 am in reply to: Neff B1451N2GB/01 #377885
    OLLIE2806
    Participant

    Re: Neff B1451N2GB/01

    Yes, i think someone may well have been at it before me,
    Its a white with small black crosses on it, not the normal material but the sort of cotton coated material – all others like it are going to elements etc.

    July 11, 2012 at 3:36 pm in reply to: Neff B1451N2GB/01 #377882
    OLLIE2806
    Participant

    Re: Neff B1451N2GB/01

    Hi guys, does anyone have a wiring diagram for this?
    The 7a connector on the selector is going to the earth tag of the fan element, is this normal? if so it must be the selector as there is continuity between that 7a and the live / neutral parts of the selector.
    Any help is much appreciated.
    Thanks

    July 8, 2012 at 9:00 pm in reply to: Neff B1451N2GB/01 #377881
    OLLIE2806
    Participant

    Neff B1451N2GB/01

    Hi, yes it’s out and I’m
    testing just from the connecter block.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 153 total)
1 2 3 … 9 10 11