Forum Replies Created
-
Posts
-
Re: Siemens D/W SF24261GB/08,
Yes, i think so mate, There is a chip come indent that looks like the board has been grated almost about a cm odd long, just above the square shaped component i was on about and the connectors directly adjacent to it are for the dispenser (Solonoid definately has continuity though) other thing is the point for the square black component that should be soldered from the other side has blown that connection point also
Re: Siemens D/W SF24261GB/08,
Thanks Clive, Whats the best way to check if the dispensers dodgy? This one no longer shuts (Only thing is i cant be certain it did before the blow).
Re: Siemens D/W SF24261GB/08,
Any thoughts on what that larger square shape relay’s for or a possible reason for it blowing?
Re: Siemens D/W SF24261GB/08,
from what i can see there’s 3 relays on this board, looking at it with the pcb opened up so the connector pins are at the bottom, there are two smaller rectangular shaped that are sat vertical to the pins ones that seem and a slightly larger square shaped one running horizontally to the pins and this is the ones thats blown, it seems to have blown quite severely. Any ideas?
Re: Teknik (Bosch) SMS6012GB/14
will do, i did take it apart and gave it a clean but nothing drastic in there, and it definately rises up to activate the microswitch and realeases it as should, Is there a certain period of time that the microswitch for this is active and must be switched within that?
