Forum Replies Created
-
AuthorPosts
-
OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
Ive Checked the microswitch etc – All fine. Ive identified the cicking to the diverter valve on the heater, Also ive found something a bit strange – the bit of wiring loom that connects the divertor the circ pump and the mircroswitch appears to be down to earth, when i do an insulation Res Test from the small tag for the circ pump to earth it reads 0.08 (even with Circ Pump, Divertor and mircoswitch disconnected but when i disconnect the connector from that part of the pcb the reading comes right up fine. Any ideas?
Im going to give up on this one soon. LOL!OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
Hi mike,
Yes i have had good read but im pretty sure ive tried everything ive read – Impeller jug, valve, pcb, transfer pipe & pump is clear, I havent changed the metering tank but that looks clearOLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
Today i changed the board but still exactly the same, Im stumped!
OLLIE2806
ParticipantRe: Indesit IDL530 Low Ins Problem
Anyone? 🙁
OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
No not yet mate, ive Gone with board. going back next friday, Will let you know.
OLLIE2806
ParticipantRe: John Lewis JLDV08 Heating isses
Hi huys,
Still no joy with this guys, any last ideas?
Ive run diagnostics and it through up and E62 when testing element and e32 when testing the sensors,
Ive tried the element, the board, the NTC and brushes (front and rear)
Im thinking the wiring is the only thing left but what wires would i test? Has anyone got a wiring diagram? Is it time for the bin?
Any ideas would be great.
Thanks
OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
There isnt an aquastop on it, just a valve and water is going to that fine
OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
Yes, they are Nice and clear.
OLLIE2806
ParticipantRe: Bosch SRS43C22GB/04 – Check Water light
Changed the impeller jug but still the same,
Drains for a bit as expected then theres a few clicks from around the lower metering tank area (cant make out exactly where from) then the check water light comes on.
Any ideas?
Thanks.OLLIE2806
ParticipantRe: John Lewis JLDV08 Heating isses
I cant get it to go into diagnostics, Ive tried holding start and an option and turning the dial etc but no avail and yes to the damp clothes.
OLLIE2806
ParticipantRe: AEG FAV50870 911916618/01 Part numbers
Does anyone have the manufacturers part number for the above heater element? (flow through type)
ThanksDecember 16, 2011 at 3:19 pm in reply to: aeg S75358 KG3 Fridge Freezer – Fridge wont get to temp #365603OLLIE2806
ParticipantRe: aeg S75358 KG3 Fridge Freezer – Fridge wont get to temp
Thanks Colin, Can you send me the info. I cant for the life of me get this top cover off, There is definately no screws like on the Zanussi’s.
OLLIE2806
ParticipantRe: AEG FAV50870 911916618/01 Part numbers
Thanks Martin, Much appreciated.
OLLIE2806
ParticipantRe: Bosch WAE24465GB/03 Disable Beep
Thanks mate,
Excellent stuffOLLIE2806
ParticipantRe: Stoves 050564161 Wiring Diagram?
Anyone?
-
AuthorPosts
