Owain84

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 46 total)
1 2 3 4
  • Author
    Posts
  • January 25, 2010 at 4:33 pm in reply to: Zanussi dishwasher #310111
    Owain84
    Participant

    try looking at module in door for dry joint on board
    Dave

    January 20, 2010 at 5:08 pm in reply to: Samsung RS21 #309151
    Owain84
    Participant

    Try looking at the connection at the back of the fridge, seen one of these with the wire has snapped ,but hanging on by the insulation
    Also changed a couple of fans
    Dave

    January 20, 2010 at 9:12 am in reply to: WPL AWO D4505 DOOR SEAL #309313
    Owain84
    Participant

    with connect its not available updates to 481246068617 £14 26
    the £47 one is 481246068633
    whats the difference?
    Dave

    January 19, 2010 at 7:37 pm in reply to: BOSCH D/W SGV53E03 #308799
    Owain84
    Participant

    thanks for your help
    Dave

    January 19, 2010 at 9:05 am in reply to: BOSCH D/W SGV53E03 #308797
    Owain84
    Participant

    SGV53EO3GB/55
    FD8509
    S/N07855651817
    Cheers
    Dave

    January 14, 2010 at 5:08 pm in reply to: L.G Pump #308575
    Owain84
    Participant

    IF you put these on drain the m/c will only pump for a few secs even tho window will read 1 or 2 mins put it on spin then see if it drains out
    Dave

    January 8, 2008 at 3:49 pm in reply to: indesit w123 #238940
    Owain84
    Participant

    Re: indesit w123

    its the one piece stainless steel drum. Great stuff!

    when i shone a light by the heater. i couldn’t see a bracket all i could see was a hole. the heater looks quite sturdy to be honest so i think i will try the putty

    January 8, 2008 at 3:37 pm in reply to: indesit w123 #238937
    Owain84
    Participant

    Re: indesit w123

    ok so can u get that screw or shall i just seal it off with silicone?

    January 2, 2008 at 5:29 pm in reply to: Miele G1270 f14 #238024
    Owain84
    Participant

    Re: Miele G1270 f14

    hey just to let ppl know, it was the circuit board had blown!

    £300+!!!!

    Motor connections on board and motor connector block connecting to board both bown to a black mess

    Cheers

    December 28, 2007 at 1:16 pm in reply to: Miele G1270 f14 #238022
    Owain84
    Participant

    Re: Miele G1270 f14

    i just read on another post that u say if pump doesnt kick in then its on motor, the one i went too fills and then u just get a clicking noice no motor kicks in at all

    December 28, 2007 at 12:43 pm in reply to: Miele G1270 f14 #238020
    Owain84
    Participant

    Re: Miele G1270 f14

    so where is the pressure switch on the machine, when i went there the only thing i could get to was the pump from inspection panel, do u take bottom off?

    December 28, 2007 at 11:09 am in reply to: Miele G1270 f14 #238018
    Owain84
    Participant

    Re: Miele G1270 f14

    whats the click though, its coming from the box at the back

    September 7, 2007 at 2:30 pm in reply to: servis m6002 going into spin #226949
    Owain84
    Participant

    Re: servis m6002 going into spin

    brilliant Cheers!

    August 24, 2007 at 3:51 pm in reply to: beko 1715 #225629
    Owain84
    Participant

    Re: beko 1715

    tried the reset and now works fine.

    Prewash flashing is time out on pump which once i tried the reset and ran a drain program, i realised it was slow. Took off outlet and a button was blocking the flow.

    Cheers

    If the Prewash aux button (left hand side) flashes then its child lock if its the prewash (right hand side) flashing its time out on drain!

    August 24, 2007 at 12:44 pm in reply to: beko 1715 #225627
    Owain84
    Participant

    Re: beko 1715

    when i say prewash i dont mean button perwash indicating child lock i mean the prewash light on the right hand side

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 46 total)
1 2 3 4