paclx

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • July 18, 2022 at 9:38 am in reply to: Siemens iQ700 access to change dampers #483013
    paclx
    Participant

    Thanks. Is 00742719 the correct part number?

    July 18, 2022 at 9:16 am in reply to: Siemens iQ700 access to change dampers #483011
    paclx
    Participant

    Thanks Dave. Rear access looks to be fairly simple. Front may be more of a challenge. Any tips?
    Hugh

    July 18, 2022 at 8:06 am in reply to: Siemens iQ700 access to change dampers #483009
    paclx
    Participant

    Thanks Dave. The E-Nr is WM16S890EU/14 FD 9205 00448

    July 5, 2018 at 2:21 pm in reply to: siemens iq700 washing machine softener pump #456668
    paclx
    Participant

    Re: siemens iq700 washing machine softener pump

    Thanks very much for that. Yes, the softener pump is clogged, and the softener is congealed. So I’ll strip it down and see what I can do. Can’t get any worse!

    July 4, 2018 at 11:44 pm in reply to: siemens iq700 washing machine softener pump #456666
    paclx
    Participant

    Re: siemens iq700 washing machine softener pump

    E-Nr: WM16S890EU/14 FD 9205 00448

    March 26, 2018 at 3:25 pm in reply to: Liebherr bio-fresh/freezer #455010
    paclx
    Participant

    Liebherr Premium BGNDes2986 Biofresh service manual

    Does anyone please have the pages dealing with the service of the Biofresh (with fault codes) for Liebherr Premium BGNDes2986??

    In hope…..

    Thanks

    December 25, 2014 at 2:44 pm in reply to: Falcon 211 GEO Oven tripping circuit breaker #422955
    paclx
    Participant

    Re: Falcon 211 GEO Oven tripping circuit breaker

    Thanks. It still seems odd that it only trips after a few minutes, rather than immediately the oven is turned on.

    December 25, 2014 at 1:54 pm in reply to: Falcon 211 GEO Oven tripping circuit breaker #422953
    paclx
    Participant

    Re: Falcon 211 GEO Oven tripping circuit breaker

    Just tested it with the multimeter. As soon as I touched live and earth with the probes the breaker tripped (obviously the power to the cooker was OFF). Before I reset the breaker I tested and there is no measurement between live or neutral and earth. Oven control was ON

    December 25, 2014 at 1:23 pm in reply to: Falcon 211 GEO Oven tripping circuit breaker #422952
    paclx
    Participant

    Re: Falcon 211 GEO Oven tripping circuit breaker

    I have two ovens, one convection, the other fan assisted. It’s the convection oven that’s tripping the breaker. I’ll get my multimeter and check

    December 25, 2014 at 12:12 pm in reply to: Falcon 211 GEO Oven tripping circuit breaker #422950
    paclx
    Participant

    Re: Falcon 211 GEO Oven tripping circuit breaker

    Forgot to add, the element was replaced by the service agents 4 years ago. I don’t use that oven often, as I prefer the fan oven on the right side.

    December 25, 2014 at 12:09 pm in reply to: Falcon 211 GEO Oven tripping circuit breaker #422949
    paclx
    Participant

    Re: Falcon 211 GEO Oven tripping circuit breaker

    Many thanks for your reply on Christmas Day!!!

    It trips the main power to the entire floor. I assume it’s a RCD and it is very sensitive as it doesn’t trip the cooker MCB on the fuse board. The element is new, as I replaced it today. Still trips. It happened a year ago (at Christmas again) and I’ve only just got around to ordering and replacing the bottom element. According to the manual, there are two thermostats. One inside the oven to control temperature, and one somewhere else at the back to ensure temperature doesn’t overheat other components.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)