Forum Replies Created
-
Posts
-
Re: Integrated Whirlpool ADG7550 query
Open door. Slacken screws 2 + 4 two turns down each door edge. Lift door – panel will probably fall on your foot.
Penguin45.
Re: Ikea Whirlpool Slimline Dishwasher not circulating water
If it’s been running, the capacitor is the more likely candidate. Possibly blocked.
Penguin45.
Re: Candy door seal
Right – fitted 41021401 to this machine – it does go on, but there is far more “pleat” on it. I suspect that it’s meant to fit a machine with the drum set further back.
It’ll probably chafe through quite quickly.
Chris.
Re: Ikea Whirlpool Slimline Dishwasher not circulating water
Right – the humming noise is power going to the motor. The circulation motor may be stuck. Two years without use can make the water seals stick together. You may be able to break it free by manually turning the motor. Alternatively, the start/run capacitor may have failed – this effectively provides a “kick” to start the motor.
Power off if you’re going in and beware of the metal edges – you can shave with them……..
Penguin45.
Re: Ikea Whirlpool Slimline Dishwasher not circulating water
After it fills, apply no. 1 ear to door and see if you can hear a faint humming noise.
Penguin45.
Re: Hotpoint FDW60 Fault
No drain detected in the time allowed – you’ve probably got a blockage.
Power off if you intend to sort this yourself.
Penguiin45.
Re: Ikea Whirlpool Slimline Dishwasher not circulating water
It’s down the edge of the door.
Penguin45.
Re: Problem with an AEG Competence Oven
Element works but no fan suggests fan motor failure or cooked wiring.
Model number will additionally be found on the oven casing, the user book or your purchase invoice.
Penguin45.
Re: DieDetrich LZ9616U1 Heater wire!
Latham63 wrote:Ok this machine is very similar to Zanussi.
There’s a reason for that…… 😀
Stuff in you in-box.
Chris.
