Forum Replies Created
-
Posts
-
Re: Trying to identify Brand and Model of my washing machine
ADP8702. Possible /1 and /2 versions as well.
Penguin45.
Re: Bosch F/F Part
01450 2655 is the Irish number – make sure you tell them you’re trade – you’ll get a bit knocked off the price.
Chris.
Re: Spam
DAS5-b wrote:Hi, Just to let you know that the Hotpoint OpenSpace is available and all models are out in the market now. If you go to the Hotpoint Website there is a link through to a dedicated OpenSpace site, whcih will list your local suppliers, so you can see one in the ‘flesh’ Hope this helps.
Hmmm – bit blatant – poster has an @indesit.com addy.
From THIS thread.
Chris.
Re: Hotpoint WD420 Lights Flashing
If all lamos arfe flashing, it’s a gimme for a module failure.
Chris.
Re: HEC12EFM
No info, Baz, sorry. The later ones are using a flow meter and no p/sw at all. Rob’s probably seen a few by now…
Chris.
Re: Ise5 conditioner
The machine shares the lock with the 1242W. That lock has destroyed 10s of 1000s of Hotpoint WMA’s over the years when it blows. Basically, it doesn’t “snap back” cleanly when it disengages. This particular machine, I’d change the lock to the current Hotpoint one and swap the top board. Keep it – it’ll probably be absolutely fine in the next machine that needs one.
Chris.
Re: Bosch SGS42 not starting
The first action of any programme should be to run the drain pump. This will be followed by fill – when water level is attained, the circulation pump should kick in. On a main wash sequence, the dispenser will fire and the water should be heated.
If none of the above is happening, I’d be looking at the door switch mechanism; and if that is working, possibly the PCB.
Full model number would be useful, please.
Power off if you’re dealing with this yourself.
Penguin45
