PGS

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 321 total)
1 2 3 … 18 19 20 21 22
  • Author
    Posts
  • March 22, 2007 at 1:45 pm in reply to: Indesit DI620 D/washer #207954
    PGS
    Participant

    Re: Indesit DI620 D/washer

    The saga continues I fitted a heater to this m/c and the same fault is present, although the dispenser fault is resolved ( customer forced shut after inserting tablet) Do i order PCB ,.

    March 21, 2007 at 10:42 am in reply to: SERVIS M9409 #208429
    PGS
    Participant

    Re: SERVIS M9409

    It is a brushless motor and i tried to help it to spin by hand proving cap

    March 16, 2007 at 11:16 am in reply to: hotpoint wf240p #207937
    PGS
    Participant

    Re: hotpoint wf240p

    maybe just door lock overheating and going open circuit, worth a try.

    March 6, 2007 at 10:18 pm in reply to: lg washer #206821
    PGS
    Participant

    Re: lg washer

    check harness around heater area for damaged wiring

    February 27, 2007 at 6:09 pm in reply to: ZAN FJS1397 #205801
    PGS
    Participant

    Re: ZAN FJS1397

    Thanx A mill cab.

    February 19, 2007 at 9:15 pm in reply to: Indesit WIDL126 #204824
    PGS
    Participant

    Re: Indesit WIDL126

    thanx a million

    February 19, 2007 at 7:11 pm in reply to: Indesit WIDL126 #204822
    PGS
    Participant

    Re: Indesit WIDL126

    yes i seen fault codes but ther is nothing in there that mentions door lock indicator. As far as i can see it only relates to the delay neon.

    February 18, 2007 at 7:01 pm in reply to: Zan ZSF4123 #204357
    PGS
    Participant

    Re: Zan ZSF4123

    lower spray arm ordered i will let you know result cheers chichele

    February 7, 2007 at 5:24 pm in reply to: zanussi FX1265W #203320
    PGS
    Participant

    Re: zanussi FX1265W

    I had the same last week ,signs of burning on interlock which had blown main PCB defo a ber.

    January 31, 2007 at 7:17 pm in reply to: Zan ZSF6120 #202681
    PGS
    Participant

    Re: Zan ZSF6120

    new board fitted m/c now Aok thankyou

    November 17, 2006 at 1:00 pm in reply to: AEG FAV6040 Dishwasher #195678
    PGS
    Participant

    Re: AEG FAV6040 Dishwasher

    Thanx guys its nice to be armed in these situations.

    October 30, 2006 at 3:17 pm in reply to: Creda oven Mod 48902 Ser no. 25100091 #193324
    PGS
    Participant

    Re: Creda oven Mod 48902 Ser no. 25100091

    Did you fit a genuine stat or a Euro stat which may have a lower temp setting .

    October 30, 2006 at 3:14 pm in reply to: whirlpool cooker fault 03 #193072
    PGS
    Participant

    Re: whirlpool cooker fault 03

    Fitted new board today and cut resistor 1 as no after serial was 4 when i switched on STOP flashed approx every 10 seconds and that was it , still no further forward cheers paul.

    October 30, 2006 at 3:12 pm in reply to: Hotpoint WMA35 #193606
    PGS
    Participant

    Re: Hotpoint WMA35

    Cheers Martin job sorted )motor tacho fault)

    October 28, 2006 at 9:37 am in reply to: belling part number #193600
    PGS
    Participant

    Re: belling part number

    Thermostat connect pt no 5031682227789 £49.42

  • Author
    Posts
Viewing 15 posts - 271 through 285 (of 321 total)
1 2 3 … 18 19 20 21 22