[phil59]

thanks very much that will do nicely

[phil59]

Re: hoover am110 timer

timer

[phil59]

Re: hotpoint wm64 help!

bob thsts brill cheers

[phil59]

Re: wd420 33141231

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light
???

[phil59]

Re: SERVIS M6602W

hi these are really bad for board overheating/melting sometimes due to damp conditions

[phil59]

Re: hotpoint wf340p

scrap it unless its in some sort of display mode for shop demos 😕

[phil59]

Re: Servis M6135

sounds like a timer fault to me :snigger:

[phil59]

thanks bob & jim much appreciated

[phil59]

cheers bob i will give it a try tomorrow
p.s.dont suppose you have wma1 test proceedure

[phil59]

if there is they are all hiding “he he”sorry couldnt resist

[phil59]

sorry lets alter that to cro1 in demo

[phil59]

Re: Zanussi WDJ1294 timer advancing

hi have we tried an element ? 😥

[phil59]

hi martin yes same problem a while ago main board fault cheers phil

[phil59]

cheers chris never noticed before sorted now
phil

[phil59]

cheers alan but this w103 has normal plugs all the way down the board,it doesnt change to the small type half way down!

[Author]

Posts