Forum Replies Created
-
AuthorPosts
-
Profyaffle
ParticipantRe: HJA8513 (31800057) Doing Crazy things
Hi Martin, document sent was User manual 🙁 Hope you can help.
Needing one too for the HNF7148, PleaseProfyaffle
ParticipantRe: Belling XOU 594
She’s tried Seamy but the phone just goes to answerphone. Friend of a friend sort of arrangement. Product:444445031 serial:70325019
They bought a second hand AEG but broke the doorglass bringing it in….oops!! £130 😯 Just for the Glass. Told them it’s a better machine and I’d put the money into that one, but hey! who am I to argue with a customers choice.
ChrisProfyaffle
ParticipantRe: Samsung RS21 Refrigerator Over Icing
Hi Bryan, just letting you know that your call on position of the Thermal fuse was spot on. Replaced it with one in the correct place and all is good. Cheers, Chris.
Profyaffle
ParticipantRe: Terms and Conditions for Service
Thank you
Profyaffle
ParticipantRe: ADG450 DW problem?
I’m getting this exact same problem. All the components are giving me good readings, my guess the reed Switch or main PCB is faulty. Anyone clarify this for me?
ChrisNovember 27, 2012 at 10:07 am in reply to: Zanussi Tumble Drier TCE7127W Stopping and Beeping 3 Times #385414Profyaffle
ParticipantRe: Zanussi Tumble Drier TCE7127W Stopping and Beeping 3 Tim
There was clothes in the machine as the customer had put it on for me before I got there. Even after my arrival the machine continued for approximately 10-15 minutes before it came up with the error..made a lovely cuppa! I’ll return and try the diagnostic, thank you. Again though supporting documentation if poss would be appreciated.
Profyaffle
ParticipantRe: Samsung RS21 Refrigerator Over Icing
Yes Bryan, It all worked and got a call back 3 weeks later.
I’m sure I was very careful but it’s all possible. I’m due to go back todayProfyaffle
ParticipantRe: Tech info for SIXL145 needed
May I have it too please 😉
mckenna_chris@hotmail.comProfyaffle
ParticipantRe: Manufacturer requiring Service Repair Agents
Email sent 🙂
Profyaffle
ParticipantRe: **Urgent** John Lewis (Zannussi) JLFFW1803
Hi Guys, any Tech Info on this one please
Profyaffle
ParticipantCoding of Zanussi PCB
The board is generic with Hex programming, coded as previously mentioned. The boards are identical although I think the JL is preprogrammed. My problem is the door interlock is not disengaging and the old one’s relay was burnt out as a result. Hence the constant clicking of the interlock then displaying fault code.
Profyaffle
ParticipantRe: Whirlpool F/F Thermostat
Thanks Don, email gone out
Profyaffle
ParticipantRe: raw appliances
Hello,
We would be very grateful if you can forward a list of Raw Washing Machines you have for sale?
ThanksProfyaffle
ParticipantBritish Gas
Would like a contact too please
Profyaffle
ParticipantHoover HNMF 2805 A80
I have one doing the same, info for me, pretty please 🙂
-
AuthorPosts
