qcarelsen

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 57 total)
1 2 3 4
  • Author
    Posts
  • February 6, 2019 at 1:34 pm in reply to: Busy London based Appliance Engineering Company seeks full time Appliance Engineer #460290
    qcarelsen
    Participant

    Yeah sorry, 1 Saturday a month.

    April 28, 2016 at 5:43 pm in reply to: Zanusisi ZDV12002FA #437342
    qcarelsen
    Participant

    Re: Zanusisi ZDV12002FA

    Thanks bazza

    March 3, 2015 at 7:44 pm in reply to: Teka HA 840 #425231
    qcarelsen
    Participant

    Re: Teka HA 840

    Hi,

    Yes thanks for that, it didn’t print to well, but I went with it, and once there with the wiring diagram and the new timer it all made sense, the old timer had no numbers on,so couldn’t do a straight change but following the diagram was very simple in something I thought I am going to regret.

    Thanks allot.

    February 23, 2015 at 6:32 pm in reply to: ID cards #424872
    qcarelsen
    Participant

    Re: ID cards

    Thanks Don and Lawrence

    December 23, 2014 at 9:17 am in reply to: Teka HA840 Oven #422904
    qcarelsen
    Participant

    Re: Teka HA840 Oven

    Thank you, much appreciated

    June 11, 2014 at 5:52 pm in reply to: Card Payment Machine. #415137
    qcarelsen
    Participant

    Re: Card Payment Machine.

    Thanks Kwatt, will have a look at that, looks allot better than what I looked at last time with them.

    June 11, 2014 at 5:50 pm in reply to: Card Payment Machine. #415135
    qcarelsen
    Participant

    Re: Card Payment Machine.

    I did get a quote from PayPal, not much different to the rest when it comes to price, but I did see a message on one of the forums before that looked like a good deal, but like I said I can’t find it.

    Will let you know if I find any thing of interest Andy Jones.

    But hopefully some one will know what I am speaking about.

    September 18, 2013 at 3:50 pm in reply to: Kuppersbusch Eeb65000mx #401162
    qcarelsen
    Participant

    Re: Kuppersbusch Eeb65000mx

    No I have not, will go back and do that, thanks.

    September 17, 2013 at 3:09 pm in reply to: Kuppersbusch Eeb65000mx #401158
    qcarelsen
    Participant

    Re: Kuppersbusch Eeb65000mx

    I tested all the elements to see if they are open circuit or not, and the setting was on normal oven where both elements is used, but that doesn’t matter. it tripped on any setting I put it on, even just the light, I also checked the bulb and the bulb holder, and that was all fine.

    January 30, 2013 at 7:06 pm in reply to: Lamona HJA8630 dishwasher #389090
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks that is a good tip, it is the 2 purple wires, but I normally check it from the bottom without pulling the appliance out if the kick board comes of easy.

    January 30, 2013 at 6:57 pm in reply to: Lamona HJA8630 dishwasher #389088
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks Bob, I will go for PCB then, as I am 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure heater is fine. Cheers, and thanks again.

    January 30, 2013 at 6:41 pm in reply to: Lamona HJA8630 dishwasher #389086
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Hi Bob,

    Thanks for that, I did think it was the PCB but wasn’t sure, as the first time I heard about this problem was when the customer phoned me due to no heat any more, so I was very unsure about this one as the heater reads fine and there is power going to the heater, do you reckon it still is the same problem, I think it is but I am just double checking.

    January 30, 2013 at 6:24 pm in reply to: Lamona HJA8630 dishwasher #389084
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    The only other number I have got is 95735 and R-54

    January 30, 2013 at 5:34 pm in reply to: Lamona HJA8630 dishwasher #389082
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks Bob, have you got a part number for me, O and one more thing, the other one we went out to stopped heating at all,will this be the same fault

    November 22, 2012 at 5:32 pm in reply to: Bosch washing machine fault #385147
    qcarelsen
    Participant

    Re: Bosch washing machine fault

    Don’t worry , I think it was just a tipping error and I have got it now.

    Thanks again

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 57 total)
1 2 3 4