[Righty]

Re: caple DI440 diaphragm switch

Another update, i can perform a rinse no problem . But on every other cycle it stops and gives the 4 bleeps needing a re-set . The most resets needed to complete a 65 C wash was 5.

model number 854544015710

if you can help, thanks

righty

[Righty]

Re: caple DI440 diaphragm switch

Update , i have managed to change the pressure sump switch with a new one so have stopped the leak , have just put it a quick wash to test it and 10 mins the dreaded 4 beeps and flashing 4 lights . Have reset the start button and it finished the cycle . Seems to bleep when it starts to pump/drain .

What area now should i be looking ?

thanks

Righty

[Righty]

Re: Will not spin

problem fixed ………….engineer came , checked motor and brushes all ok . Noticed on filling that the water came halfway up the door , said he knew the fault ……………blocked pressure switch tube . Cleared it and gave me some descaler to run thru the machine . Could have been alot worse .

[Righty]

Re: Caple DI 440

Ok……… had an engineer round , he found the bottom tray full of water which had activated the float safety switch . he said that the hose from the pump had split . Now on calling spares suppliers it seems that i cannot get a replacement hose . My pump is working ok….. but it seems silly that i might have to scrap the dishwasher over a £10 hose . Is it possible to get this hose from anywhere ?

[Righty]

Re: Caple DI 440

thanks for your info Penguin45, I have never taken a dishwasher apart . How does the bottom plate come off ? It seems to have star screw fixings ? thanks.

[Righty]

Re: White Knight CL 847

thanks for your reply…….i’m not that handy with stuff , could you point me in the right direction for these paddles ?

[Author]

Posts