[robstech]

Re: Beko 930 ice chute flap still won’t open after being rep

How do you replace the flap? I have never done one on these before.

[robstech]

Re: Zanussi IZ141 anomaly

Thank you both,

checked heater,cables and ntc terminals, brushed off some carbon deposit from the module and everything is working normal now. ❗

Rob

[robstech]

Re: Miele G1252SCI Dishwasher error code

Thanks for the very detailed repair procedure, much appreciated.

Cheers
Rob

[robstech]

Re: Beko WME7247 fills and ecpties at same time

Will do..ta

Thanks for that…
Rob

[robstech]

Re: Hoover TCE660 001

Thanks for that Don, it was a big help 😀

Rob

[robstech]

Re: BEKO CDA539FW defrost

Thanks for the good info Bob.

Rob

[robstech]

Re: Whirlpool fridge freezer S20DRBB American Style

Customer didn’t want to go to the expense of a new board.

Does any one know what part of the board causes the CF communication fault? Is it a logic problem or is it some of the other components on the board?

[robstech]

Re: AEG Dishwasher F50750

Thanks for the info, will check on return visit.

Rob

[robstech]

Re: Hotpoint DFI62 Wiring

Yes ..BFI62..thanks for noticing.

Rob

[robstech]

Re: Hotpoint TL71

thanks for that..Cheers
Rob

[robstech]

Re: SAMSUNG RSH1 Series American Style Side-By-Side

Anyone have any detailed information on this mod?

Robert

[robstech]

Thanks everyone for your help, Going back with a board from EMW,
Rob

[robstech]

Re: Zanussi ZWF14070 fills and stops

Fitted new heater, still have the problem, everything else is checking out fine, probably down to a faulty board.
Rob

[robstech]

Re: Zanussi ZWF14070 fills and stops

Checked heater, it’s leaking to earth, will fit new heater and see what happens. Many thanks

Rob

[robstech]

Re: Creda TVR 2 Dryer

Have you looked at the motor start relay?

[Author]

Posts