[robti]

Re: Bosch Exxcel high low heat connections

Thanks for that, okay it might have been the thermostats that I disconnected 3 or 4 wires with a loop between them,

[robti]

Re: Bosch no fault codes displayed

WAE28464GB/03 FD 8603 600102
Sorry I just wondered why no codes showed

[robti]

Bosch no fault codes displayed

Hi my Exxcel 1400 express stopped turning on all programs but had no error codes coming up, so suspected either belt or brushes and found out brushed were well worn over 10 years old since new.

So would you say it was the brushes or anything else I could try, just disappointed that I didn’t get an error code up to help

[robti]

Re: Smeg DI612 e4

Sorry don’t know where to edit my post and add to it.

So had the door off and no thermostat in there and all the wires from the machine to the door are in good condition.

Maybe I got it wrong but I assumed the fault was in the door thermostat, so any help on this please ?

Thanks

[robti]

Re: Smeg DI612 e4

Okay can I ask if this stat is in the door and does anyone know how to open the door for access

[robti]

Re: Found this in my top basket smeg dishwasher

Wow thanks I don’t know how to thank you enough I didn’t even know I had that up there, I must have put something too high in and it’s caught it as I closed the top basket.

Thanks again

Robert

[robti]

Re: Found this in my top basket smeg dishwasher

Sorry thought it might have been a standard part.

Model number is DI612CA9

[robti]

Re: recommend a fridgefreezer <£300

Thanks Don

Funny enough his sister has that model and also from boots last year, he was looking at a Daewoo on currys for £229 but i don’t like the far east products

Robert

[robti]

Re: Zanussi fridge freeezer defrosted and not cooling

Thanks for the reply don’t think it’s worth repairing then, might have been if it was only the stat that was gone I could of changed that myself

[robti]

Re: Zanussi fridge freeezer defrosted and not cooling

Woke up this morning and it is warm again – but the compressor still appears to be running. any ideas? Thanks

[robti]

Re: Zanussi fridge freeezer defrosted and not cooling

Okay cleaned it out and switched it back on and 20 mins later it’s cool getting on cold, so any ideas, hope it was just needing defrosted

[robti]

Re: Hotpoint VTDOOP turning but thumping

Thanks Martin
sn 411050675 95313300000

Robert

Sorry just discovered this is in the wrong forum, mods feel free to move if needed

Robert

[robti]

Re: bosch wta4108gb/03 tfitting new belt help

Got the shorter belt and perfect fit 😀

Robert

[robti]

Martin wrote:

robti wrote:
i may have the 4 model and not the 3 as on the ticket, so re-ordering a replacement

The WTA4108GB/03 & WTA4108GB/04 both have the same sized belt (Bosch Part No: 446856)

Thanks for the reply, but the label on the machine shows the /03 model which has a belt with the no. on it EPH-1906.

Now ordered off the UKWG shop and recieved a belt with 1930 on it which should have been the correct one for that model of machine.

Now the replacement belt is approx 1″ too long so i equate the numbers on the belt too length and the 30mm extra would be the 1″ approx too long.

So contacted Dave who advised me to order the shorter belt from the /04 model which has the 1903 stamped on it.

So as i am not an expert in this i can only assume i got a late /03 model with a /04 drum

no.s from ukwg shop

http://shop.ukwhitegoods.co.uk/Tumble+D … +Belt.html

http://shop.ukwhitegoods.co.uk/Tumble+D … +Belt.html

As you can see not thye same so i could only follow whats info i had

Robert

[robti]

Re: bosch wta4108gb/03 tfitting new belt help

Thanks for the helpfull replies :rolls:

Just for anyone in the same situation ordered the replacement belt from the spares shop on here and it was the correct one for my model no. but after a few e-mails to Dave found out that i may have the 4 model and not the 3 as on the ticket, so re-ordering a replacement

Robert

[Author]

Posts