[rocker]

Cheers Dave..will give it a try..

[rocker]

Update..the customer has used the washer only it works ok…but on dryer when it finishes there is a layer of water in drum..any advice would be welcome…thanks

[rocker]

cheers Mate..will have a look

[rocker]

makes sense..Cheers Dave.

[rocker]

Will look into it..cheers John

[rocker]

Just checked I have the correct parts..must have fitted incorrectly…Cheers for you help Dave..

[rocker]

Cheers Dave..will check I have the right ones..John

[rocker]

yes according to connect it is correct part I gave them the number on the original one..they do look identical..It must be me I will back and have another try..thanks for you help..John

[rocker]

After realising it works when turning to the left..I fitted the selector switch with the cables facing downwards as the other selector is fitted..but the spindle is the wrong way round when off…if I reverse the selector the state won’t line up..bit concussing…I will go back it must be me…Thats way I wanted to see a photo of the selector fitted so I know I have it fitted correctly

[rocker]

Hi Dave, it does indeed turn left as I found out after a long time trying to turn it right ….but still can’t seem to get it right after trying different configurations, If had a clear picture / photo it would help..John

[rocker]

Cheers idiom..John

[rocker]

Cheers Dave, many thanks for your help..John

[rocker]

I agree. Dave

[rocker]

Just to let you know I wired No 1 positive 3 negative

[rocker]

zero ohms between 3&2

[Author]

Posts