Simon46

Forum Replies Created

Viewing 15 posts - 1,276 through 1,290 (of 2,216 total)
1 2 3 … 85 86 87 … 146 147 148
  • Author
    Posts
  • April 6, 2007 at 11:45 pm in reply to: Ariston LSI61 Dishwasher #210120
    Simon46
    Participant

    Re: Ariston LSI61 Dishwasher

    Had one with dodgy P button. Replaced module Pbutton now ok but heater gone as well.

    S.

    April 5, 2007 at 8:02 am in reply to: Whirlpool ADG7550 11 flashes? #209937
    Simon46
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    Thanks Rick. will clean owi and see

    S.

    April 3, 2007 at 7:55 am in reply to: Bosch KGV-3104-G/04 Fridge Freezer #125159
    Simon46
    Participant

    Re: Bosch KGV-3104-G/04 Fridge Freezer

    Looks rectangular. will advise cust to defrost. control when turned down will stop compressor. appears to not be defrosting for long enough. So if ok do you think the non replacable sensor will be at fault?

    Regards
    S.

    April 2, 2007 at 7:46 pm in reply to: Serena Oven – not heating #173291
    Simon46
    Participant

    Re: Serena Oven – not heating

    What ele is this please.Qualtex type.

    Regards S

    April 2, 2007 at 2:55 pm in reply to: Bosch KGV-3104-G/04 Fridge Freezer #125157
    Simon46
    Participant

    Re: Bosch KGV-3104-G/04 Fridge Freezer

    Been to one december done the mod confirmed ok. Now there is a 2 inch iceblock on the rear panel. Cust said at the time that if she leaves items too close to rear freezing occurs. done this for a long time. If control turned to 1 freezer doesnt run in range. So fridge has 2 faults :rolls: . Would PCB cure this?

    Regards
    Simon

    March 28, 2007 at 4:20 pm in reply to: OCEAN F/F #177245
    Simon46
    Participant

    Re: OCEAN F/F

    Ah re-entered part number instead of copy and paste now comes up. 😀 Thanks Dave.

    Regards
    S.

    March 28, 2007 at 3:42 pm in reply to: OCEAN F/F #177243
    Simon46
    Participant

    Re: OCEAN F/F

    Where can i get a module for this MFI fitted apm 6823 serial number 011130591. Cant see it at masterpart.

    Regards
    Simon

    March 8, 2007 at 10:57 pm in reply to: Mum’s Whirlpool AWM6100/3 #206879
    Simon46
    Participant

    Re: Mum’s Whirlpool AWM6100/3

    Like if living in a flat?

    S.

    March 7, 2007 at 11:25 pm in reply to: Hoover HNWL3126 washer/dryer not working #206813
    Simon46
    Participant

    Re: Hoover HNWL3126 washer/dryer not working

    Is there power at the plug socket on the wall?

    Regards Simon

    February 21, 2007 at 9:34 pm in reply to: Diplomat APM 8721-1 module #205033
    Simon46
    Participant

    Re: Diplomat APM 8721-1 module

    Thanks Dave. DMPA 12 fitted.

    regards
    S.

    February 21, 2007 at 10:12 am in reply to: Diplomat APM 8721-1 module #205031
    Simon46
    Participant

    Re: Diplomat APM 8721-1 module

    Oh rot.

    Thanks P
    S.

    February 20, 2007 at 12:07 am in reply to: Bosch GSU34423GB/01 tall freezer frozen solid #190023
    Simon46
    Participant

    Re: Bosch GSU34423GB/01 tall freezer frozen solid

    Ta Greg
    S.

    February 19, 2007 at 11:59 pm in reply to: Bosch GSU34423GB/01 tall freezer frozen solid #190021
    Simon46
    Participant

    Re: Bosch GSU34423GB/01 tall freezer frozen solid

    Seals ok. Defrost drain was frozen solid as well.

    S.

    February 19, 2007 at 9:43 pm in reply to: Bosch GSU34423GB/01 tall freezer frozen solid #190019
    Simon46
    Participant

    Re: Bosch GSU34423GB/01 tall freezer frozen solid

    Frosted again today. Anybody have any ideas on what could play up if a few have been seen by now?

    S.

    February 16, 2007 at 8:35 am in reply to: Leisure Rangemaster 90D Fan oven element #204326
    Simon46
    Participant

    Re: Leisure Rangemaster 90D Fan oven element

    Didnt work. OL =235. ELE 2060 Beko fits a treat. 😀

    Regards
    Simon

  • Author
    Posts
Viewing 15 posts - 1,276 through 1,290 (of 2,216 total)
1 2 3 … 85 86 87 … 146 147 148