Forum Replies Created
-
Posts
-
Re: Whirlpool ADP436WH dishwasher timer
Thanks Chris/John. Perhaps cust will go out and buy new indesit quality dishwasher and then wish he had had it fixed.
Cheers once again
SimonRe: Indesit C239NF frost free fridge freezer
Yes, thanks Dave. Could end up out of pocket if found to be thermistor gone in the first place on top of all this and they are not available.
Cheers
Simon.Re: LCD TV for the van
Travel to work in Shropshire from Cheshire one day a week. Can be 16 hour day hrs with 2 hr gap btween jobs sitting in van. Have bought the roadstar lcd4004sil from Argos (£120)with all accessories included. Will let you know how it works once i get the dash back together!
Re: Indesit Washing machine WG1130T spin cycle
Try a boil wash. If the spin improves afterwards, the problem might be sludge in the water level contol system(thinks it has water in so will not spin). Will still need to be repaired though.
Re: A Special day for Bosch ????
If you want someone to look at it I work SK8. Just send me a private message.
Simon
Re: Hoover AL130 01
Whilst we are on the subject of ribbed plastic hoses The Merloni/Servis/Diplomat integrated washer dryers with the chafing on drum then splitting inlet valve to soap dispenser hoses now have plastic ribbed ones. Is there a conversion kit from rubber to plastic for these models for future reference?
Re: Hoover AL130 01
Thanks Martin. My local supplier has given me 41010982 ribbed hose replacement. Is this the wrong one?
Re: Indesit WG820PG module
I thought recon was dear at 19.95. Its got to be the most simple of all the indesit modules. Will buy new then no question marks.
Re: Indesit WG820PG module
Thanks Chris. Cannot find another module in my scrap box with this resistor on it and cannot work out which way round the colour code runs . Will quote cust for new module.
Thanks anyway
Simon.Re: Smeg DW167 not heating error E3
Sorry I meant the PCB/timer. It is one complete unit with display. I meter checked all components related to heating circuit and then by default PCB/timer was the only part left.
Re: Smeg DW167 not heating error E3
Repaired one recently. Mine was module but had to replace heater as it was burnt looking.
Re: Siemans SL26231GB/06 wont start washing
Sorry forgot to say fitted module complete now o.k.
Is reset procedure buttons 2 & 4 together?
Dont believe in resoldering relay with pitted contacts causing pin to desolder itself. Similar to old Whirlpool washing machine boards with clockwise and counter clockwise rotation welded relay contacts, board seems to blow again in the end.
