Simon46

Forum Replies Created

Viewing 15 posts - 2,161 through 2,175 (of 2,216 total)
1 2 3 … 144 145 146 147 148
  • Author
    Posts
  • December 17, 2004 at 4:40 pm in reply to: Zanussi Aquacycle 1400 & Condenser Dryer TC 7114 #121607
    Simon46
    Participant

    Re: Zanussi Aquacycle 1400 & Condenser Dryer TC 7114

    My aquacycle (FLE1115W 1100 spin) takes about two hours to complete a wash. It is cold fill only and the time sounds about right. A 95 degree wash is even longer. Check the door glass during the 40 degree wash. It should just be warm.

    Regards
    Simon

    December 16, 2004 at 9:13 pm in reply to: Whilpool ADG937/1S Control board blown #121560
    Simon46
    Participant

    Re: Whilpool ADG937/1S Control board blown

    Cheers John/Chris. Problem solved!

    Many thanks
    Simon

    December 15, 2004 at 10:54 pm in reply to: Hotpoint FF91 Mistral Fridge/Freezer #121500
    Simon46
    Participant

    Re: Hotpoint FF91 Mistral Fridge/Freezer

    Is the fan running in the freezer? Also does the light go out when fridge door is closed?

    December 15, 2004 at 12:55 pm in reply to: HPT BF12P integrated dishwasher: no spring tension on door #121486
    Simon46
    Participant

    Re: HPT BF12P integrated dishwasher: no spring tension on do

    Thanks for the info Dave.

    Simon

    December 14, 2004 at 9:23 am in reply to: Tricity Bendix DH086 #121449
    Simon46
    Participant

    Re: Tricity Bendix DH086

    Make sure no water has gone down the tubes or is in the diaphraghm.

    December 13, 2004 at 7:32 pm in reply to: WD40 sprayed in cooker switch #121422
    Simon46
    Participant

    Re: WD40 sprayed in cooker switch

    Thanks P, so in theory the now greasy on off switch may have volts on it!
    And customer has none RCD protected fuse box.

    December 13, 2004 at 5:33 pm in reply to: WD40 sprayed in cooker switch #121420
    Simon46
    Participant

    Re: WD40 sprayed in cooker switch

    Yes, am replacing with 10mm but customer will now have to turn light on as he cannot cook by the glow of the cable in the dark!

    December 10, 2004 at 9:35 am in reply to: AEG Competence top oven knob and indicator dial #121236
    Simon46
    Participant

    Re: AEG Competence top oven knob and indicator dial

    Thanks Dave/Chris. Oh well. Looks like another job in the bin. Nice S/S oven as well.

    Cheers
    Simon

    December 10, 2004 at 12:17 am in reply to: AEG Competence top oven knob and indicator dial #121233
    Simon46
    Participant

    Re: AEG Competence top oven knob and indicator dial

    Been down to local supplier to see exploded view to clarify. Shown on electrolux website it appears that the insert that slides onto shaft is no longer available? is this the case with yours Chris?

    Regards
    Simon.

    December 8, 2004 at 10:12 pm in reply to: AEG Competence top oven knob and indicator dial #121231
    Simon46
    Participant

    Re: AEG Competence top oven knob and indicator dial

    Chris, do you know if the disc with the symbols on comes complete/attached with the bush that slides onto the shaft? What i mean is its not just a piece of paper?

    cheers
    Simon

    December 6, 2004 at 6:14 am in reply to: Need help, can’t decide on condensor / vented tumble dryer #120976
    Simon46
    Participant

    Re: Need help, can’t decide on condensor / vented tumble dry

    Best dryer is the simplest. Vented. Less components hence less to go wrong. Sensor dry models are available. Condensor dryers recirculate the same air so drying times can be longer.
    As long as the correct heat setting is used there should be no problems.
    Do not extend the vent hose. It will cause problems with dryer. and do not use a suction fan. It is not intended to work with one.

    December 2, 2004 at 8:30 pm in reply to: Hotpint Condenser Dryer TC71 Cutting Out after a 10 seconds #120827
    Simon46
    Participant

    Re: Hotpint Condenser Dryer TC71 Cutting Out after a 10 seco

    Dont forget label or make a note of which wires go where, after pulling the mains plug of course!

    December 2, 2004 at 12:47 pm in reply to: Hotpint Condenser Dryer TC71 Cutting Out after a 10 seconds #120821
    Simon46
    Participant

    Re: Hotpint Condenser Dryer TC71 Cutting Out after a 10 seco

    The fault on this unit is the relay that holds the dryer on until the door is opened or the power is turned off. Labelled Schrack. If you wish to take a look remove the Mains plug from the socket first.

    December 1, 2004 at 11:58 am in reply to: Another Ariston LI62 dishwasher #120758
    Simon46
    Participant

    Re: Another Ariston LI62 dishwasher

    Thanks Dave. Forgot they were there. Hopefully in with a chance of blockage/drain pump fault.

    Cheers
    Simon.

    November 29, 2004 at 10:27 pm in reply to: Planning Permisson #120633
    Simon46
    Participant

    Re: Planning Permisson

    Also on some of newbuild estates, parking of a commercial vehicle is not allowed without permission of the builders of the house!

  • Author
    Posts
Viewing 15 posts - 2,161 through 2,175 (of 2,216 total)
1 2 3 … 144 145 146 147 148