stu123

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 38 total)
  • Author
    Posts
  • in reply to: Door seal retaining spring pliers #300840
    stu123
    Participant

    Re: Door seal retaining spring pliers

    and lots of fairy on the seal itself inside the lip your fitting over the drum and you will find the seal goes on easy and you can twist it if the drain grove has slipped

    in reply to: bosch kgv33v60gb/01 #302982
    stu123
    Participant

    Re: bosch kgv33v60gb/01

    must get myself to specksavers dam these small model numbers . I was actually following up an engineer who is now on holiday he ordered a element and sensor .is the mod to keep the drain hole clear of ice ? or something else
    and thanks agian for the advice

    in reply to: bosch kgv33v60gb/01 #302980
    stu123
    Participant

    Re: bosch kgv33v60gb/01

    thanks for that will go armed with the steamer cheers mate

    in reply to: bosch kgv33v60gb/01 #302978
    stu123
    Participant

    Re: bosch kgv33v60gb/01

    hmm i think i maybee caused confusion its the housing unit is in the top of the freezer where all the gubbings is hope that clears things up thanks 🙂 any help apreciated

    in reply to: df902ssa #288375
    stu123
    Participant

    Re: df902ssa

    thanks andy great help

    in reply to: siemans fridge freezer kg31v20gb/03 not frost free #285999
    stu123
    Participant

    Re: siemans fridge freezer kg31v20gb/03 not frost free

    should have the mod kit at the office send me your fax no and i will send it to you cheers stu

    in reply to: MFI Turmoil #260839
    stu123
    Participant

    Re: MFI Turmoil

    got my letter today. so the fight begins pod`s and invoices first i think !

    in reply to: Zanussi f/f #259670
    stu123
    Participant

    Re: Zanussi f/f

    Hi one of my guys has one off these today compleatly dead power to mains in board any ideas ??

    in reply to: MFI Turmoil #260821
    stu123
    Participant

    Re: MFI Turmoil

    stu123 wrote:Hello I don’t know if you’ve heard but the administrator for Mfi has employed in a company called sovereign credit, and are now calling the old repair agents one of which we were and demanding settlement of there spares bill, even though most are owed considerably more from mfi and the spares purchased were used to repair there machines under warranty. The company is using very aggressive telephone calls to old agents if you would like to discus the matter further please call

    ABOVE WAS SENT TO WATCHDOG

    in reply to: MFI Turmoil #260820
    stu123
    Participant

    Re: MFI Turmoil

    got the call today he originally went though to our credit control dept and then got forwarded to me same story pushy and offered to reduce debt by 50 {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} says debt is 2270.00 then court action and time deadlines of only a few days I told him to introduce himself in writing and we will then consider there letter and take appropriate action .the reason for mentioning credit control I then spoke to them and they came up with a couple of suggestions
    1 put invoices in dispute as no further action can continue until the dispute is resolved
    2 pods and invoices please
    3 sovereign are representing the liquidator as far as we can tell so far
    4 threatening court action in this manner is not allowed as per debt collection laws

    I think watchdog is worth a shout as they highlighted people not being paid by mfi for fitting there kitchens so this has got to be up there street .
    with all this said I think this is a snake of a company and will try and play underhanded but remember stand your ground only pay what you feel you owe don’t buckle to bully’s

    cheers Stu

    in reply to: sms50e02gb/02 #285229
    stu123
    Participant

    Re: sms50e02gb/02

    thanks for the reply one of the office guys is checking the gtee for customer tomorrow still would like to know if you hear what the fault code points to cheers stu

    in reply to: MFI Identiffier Parts Disc #270442
    stu123
    Participant

    Re: MFI Identiffier Parts Disc

    is the disc date sensative, and if so cant you just change the date on pc before loading the disc ?

    in reply to: MFI Turmoil #260739
    stu123
    Participant

    Re: MFI Turmoil

    no i owe 3k for sept and oct

    in reply to: MFI Turmoil #260736
    stu123
    Participant

    Re: MFI Turmoil

    GREAT NEWS DUG OUT OUR STATMENT OVER 3K OWING MIGHT HELP

    in reply to: siemans se4200gb/07 #261484
    stu123
    Participant

    Re: siemans se4200gb/07

    yes the same as in the post title !! and i was hoping for a actual answer not just a guess at what it may be

Viewing 15 posts - 1 through 15 (of 38 total)